What Tattoo Ink Colors Make Black?

What Tattoo Ink Colors Make Black

What tattoo ink colors make black – Red, blue, and yellow are the three basic colors that makeup black when mixed. Just mix equal amounts of red, blue, and yellow and you get a lighter shade of black. If you use a lighter red and blue, you get a brown ink color.

Be sure to use darker colors as shown in the color chart above. If you want the black color to be a little more bluish, just add a little more blue to your color mix. Hence, if you want to get the real black, you need to follow the guide below: A variety of compounds are used to make black tattoo ink.

In general, synthetic black ink is made up of iron and carbon oxides, while natural black ink is made up of materials such as magnetite crystals, wustite, and wood. With precise skill and careful application of the correct type of black ink, a skilled tattoo artist can darken black tattoo ink.

Choose the appropriate ink for the desired black content of the tattoo. Some inks, such as those made from large particle size pigments, do not penetrate deeply into the skin but appear darker near the surface.

Choose a needle that best fits the type of ink you have chosen. For example, inks with larger particle pigments require a medium taper needle. Hold the needle at a low angle and make the stroke longer. With a low angle, you tattoo a series of much darker layers rather than a shallow angle perpendicular to the skin.

  1. Also, keep in mind that you may have to spend more time using less pigmented inks while still using a faster machine;
  2. In fact, with less pigmented ink, you put less pigment into the skin with each stroke;

Install lots of small ink caps for dark black tattoos instead of one large ink cap, especially if the tattoo is large. If you continuously dip into the same ink cap, blood particles can contaminate the ink supply by diluting it and adding coagulants, causing the ink to clump into the skin that does not penetrate easily.

What color tattoo ink can you mix to make black?

Tattoo ink can be mixed by putting two colors together to make a different blend color. The basic principles of mixing paint colors come into play here. For example, red and yellow make an orange color. The more red added will give it a more reddish tint, more yellow will give more yellow tint.

What colors of ink make black?

Download Article Download Article Black is a commonly used paint color, but you may not have any on hand or you may want a black that leans slightly toward another color. Black paint can be made with equal parts red, yellow, and blue paint mixed together on a palette. You can also mix complementary colors such as blue and orange, red and green, or yellow and purple. Mixing blue and brown can also result in a rich black.

  1. 1 Use red, blue, and yellow paint. [1] Black is the darkest color, but there are still degrees of blackness you can make with paint. The exact shades of red, blue, and yellow that you use will determine the black. Use your choice of oil, watercolor or acrylic paint. [2]
    • Using Aureolin, Rose Madder Genuine, and Cobalt Blue will yield a soft black while using Winsor Yellow, Permanent Alizarin Crimson, and Winsor Blue will yield a bold black.
    • If you have a basic paint set, whatever red, blue and yellow you have will work. Magenta and cyan are common red and blue to use.
  2. 2 Put equal amounts of each color on a palette. It works best to put the colors on the palette one at a time before you mix them. Put the globs of paint about ½ inch (1. 3 cm) apart on the palette. For a basic black, use equal amounts of each color.
    • Use slightly more of one or two of the colors to give a different look to the black.
    • If you use a paintbrush to dab paint onto the palette, be sure to use a different brush for each color so that you don’t mix the paints except on the palette.
    • You will most likely not be able to create the same black from one time to the next, so be sure to make enough to paint what you want to.


  3. 3 Mix the paint together. You can use a paintbrush to mix the colors together. Some paint mixes better if you use a palette knife or some type of metal scraping tool. Spend at least 15 seconds moving the paints around to make sure you end up with one full color without any leftover bits of any individual color.
    • If you use a paintbrush to mix the paint, swirl the brush gently and don’t press down too hard. You can ruin brushes by pushing them too hard against the palette.
  4. 4 Adjust the value and hue of the black. Depending on what you use the black for will affect how you want it to look. You might add a small dab of white paint to lighten the black, or you might add a drop more blue to create a black for a night sky. [3] [4]
    • If you have time and paint to spare, experiment with the color. Add a little brown or green to the black to paint pine trees at night, or add some yellow for the sun reflecting off of black metal.
    • Mixing paint by hand usually won’t give you an exact black, but your black will have more character than a pure black.
  5. Advertisement

  1. 1 Combine red and green paint. Mixing paint colors that are opposite each other on the color wheel essentially cancels out the color properties of each and yields a dark hue. You can choose any red or green depending on how you want the black to look. Phthalo Green and Naphthol Red are great complements to combine for a simple black. [5]
  2. 2 Blend blue and orange paint. Place a dab of blue paint, such as Cobalt Blue, and a dab of orange paint, such as Translucent Orange, onto your palette. Gently swirl the colors together until a vibrant black is formed. If equal parts of each doesn’t create a dark enough black, add a bit more blue to the mixture. [6]
  3. 3 Merge yellow and purple paint. Create a mixture that is around 60% purple and around 40% yellow, and adjust this ratio to get the black that you want. Cadmium Yellow is standard paint that works well and you can mix it with a violet.
  4. Advertisement

  1. 1 Start with Ultramarine Blue. On your palette or painting surface, place a small dab of Ultramarine blue. Blue should make up roughly half of the total paint, so use as much as you need for what you want to paint. [7]
  2. 2 Place a touch of Burnt Umber near the blue. Don’t apply the two colors to the exact same spot. Rather, place them a half inch or one centimeter apart. Then gently swirl the two colors together. Adjust with a little more of either color to make the black you want.
  3. 3 Add a dab of Prussian Blue. if you want to deepen and darken the black you’ve mixed, add just a small dab of Prussian Blue. This new mixture works great for a black that shows the darkness of night.
  4. Advertisement

Add New Question

  • Question What colors can I mix to make brown? You can mix orange and purple to make a pretty solid brown.
  • Question How do I make grey? You can buy some black paint and mix it with white paint, or you can use the tutorial to make black paint and then add white to that.
  • Question What do I do if I created blue-black, but wanted dark black? You can add a bit more of the other colors you used to tone down the blue tint.
  • Question What colors of ink would make black? Same as with paint. Mixing red, yellow and blue should make black.
  • Question Can I turn black into white? No. You can add white until you get a very light gray, but you will never turn black into white.
  • Question Which primary colours should I combine to make black? Mix any colours you have — stick to red and blue for a deep purple colour and add brown or dark grey. A deep burgundy red and night blue will get you the best results.
  • Question What colors of nail polish can be mixed to make black? It’s almost impossible to mix true black. Your best bet is to just go buy a new bottle. If you try to mix your own, you’re going to waste a lot of nail polish.
  • Question How do I get black using green? Simply mix the green paint with red paint, and you should get a color reasonably close to black. Keep in mind that you can’t make true black.
  • Question How do I turn gray into black? Adding more black to a gray will make the outcome a shade of black. It will have some gray in it, so it is impossible to make it all black. You can add yellow, red, and blue in another bowl to make a bold black. Then, mix the black with gray.
  • Question Can I use this for my printer – the first thing you showed to mix red blue and yellow color – will that work? If you’re talking about a computer printer, don’t use anything except the ink that the manufacturer recommends.

Show more answers Ask a Question 200 characters left Include your email address to get a message when this question is answered. Submit Advertisement.

How do you make black tattoo ink?

Ancient Tattoo Ink – Many ancient cultures created their own tattoo pigment inks from natural materials. One of the simplest recipes called for mixing the ashes of completely burned wood with water to create a crude black ink. Carbonized black ash from burned wood makes very dense black ink, but it’s better to use something other than water as your diluent.

Can a color tattoo be made black?

Can A Tattooist Turn a Colored Tattoo Into a Black & Grey One? – Generally speaking, specialized tattoo artists can try to turn the lighter ink shades of your tattoo into white or grey ink. The black ink cannot be colored, that is simply impossible. Even the attempt to turn a color tattoo into a black & grey one is something that the majority of tattooists will refuse to do.

The only thing a tattooist can truly do, if a tattoo is smaller and not too colored, is to cover certain parts in black ink. No color can be simply taken away from the tattoo, so that’s about it. Some tattooists may try to cover the color with white ink , but that might not work, since the color underneath might still show through, especially if the color is really saturated.

To make white ink visible, the tattooist will have to go in with the needle multiple times in only one place, which would also hurt like hell.

Can you mix your own tattoo ink?

Sometimes tattoo artists face a problem when all the samples of tattoo inks in their collection are unable to procure the right shade. And doesn ‘t seem to be really possible to have all the colors, nuances and undertones to satisfy real thirst of creativity. Luckily, tattoo inks can be mixed, diluted, blended, they can be made darker or lighter. A professional can create one’s own tattoo ink combining some new colors.

  1. Mixing gives a great opportunity to turn few colors into many tints;
  2. The only thing one should remember about is using proper methods of blending in order to prevent ink ruining;
  3. The main rule of successful mixing is to stir with sterile tools only;

Breaking this important rule can cause a big problem of cross contaminating colors. If you come to mixing very often, an investment in an ink mixer would be reasonable.

What two colors mixed make black?

Creating shades of black color with primary colors – Red, blue and yellow are the three primary colors for what colors make black paint when mixed together. Simply mix equal amounts of red, blue, and yellow together and you will get a nice black. If you use a lighter red and blue you will end up with a brown – so be sure to use darker colors as shown in the color chart above.

What two primary colors make black?

How do I make the color black Rich?

How to Create True Rich Black – Now that you know when it’s best to use rich black, you should know a few CMYK formulas to create it. You must use the CMYK color mode profile in the design software to ensure a true black. There are actually a few mixtures to produce a rich black; these are two popular CMYK settings.

The first is to mix 40% Cyan, 40% Magenta, 40% Yellow, and 100% Black or K which results in (40, 40, 40, 100 – CMYK). Some designers may choose to leave the yellow out, but it helps balance the other colors out.

The difference may be subtle to the naked eye, and results may vary if you use different printing companies. The other way to create a rich black is to mix 60% Cyan, 40% Magenta, 40% Yellow, and again 100% Black (60, 40, 40, 100 – CMYK). At Clash we use this mixture as it creates a more neutral rich black.

In CMYK 240% is pretty much the limit with color mixing. If you want to adapt the above mixture to your own liking, remember you will need to lower the percentage of one color to increase that of another color.

When you experiment creating rich blacks you will understand how these 4 CMYK values affect one another and find a perfect mixture of your own. As there are 4 color variables in a CMYK color mode, there are many ways to create rich black. The common mixtures listed above may not be right for your project, but these are good models that will produce a deep black.

Can you tattoo with Sharpie ink?

Sharpie Ink – Sharpies are great. They’re the go-to, top of the line choice for permanent markers. Since the markers are permanent, then they should make an excellent choice for stick and poke tattoos, right? Wrong. Any marker labeled as ACMI “non-toxic” by Sharpie has been tested and deemed to be safe for art, but this does not include body art or using the ink for tattoos.

Even though Sharpie does not recommend using their markers to draw on skin, many people do it anyway. This doesn’t result in serious health issues, yet it’s another story when it goes beneath the outer layer of skin.

Harmful ingredients found in various sharpie markers include n-butanol, diacetone alcohol, and cresol, all of which have the potential to cause health effects such as eye, nose, and throat irritation. King size Sharpies, Magnum Sharpies, and Touch-Up Sharpies contain xylene.

Xylene is a chemical capable of damaging your respiratory, cardiovascular, nervous, and renal systems. Many of these risks come from inhaling the vapors, though all bets are off once xylene enters your bloodstream directly, which is plausible if the needle goes too deep during an amateur hand-poked tattoo.

Even if you can avoid going too deep with a stick and poke tattoo, you still need to extract the ink from the Sharpie, and you could be exposed to harmful fumes while doing this.

What can I use instead of tattoo ink?

What colors hold best in tattoos?

What Colors Last Longer in Tattoos? – Black and gray are the longest lasting color tattoos. These dark shades are dense and bold, making them less prone to fading. Vibrant and pastel colors like pink, yellow, light blue and green tend to fade faster. Credit: Instagram The shades commonly used in watercolors are very short-lived. Despite being incredibly popular, this style of tattooing requires frequent touch-ups. Credit: Instagram Credit: Instagram.

Can you cover a color tattoo with black?

Examples of Cover-Up Tattoos – Often a cover-up tattoo will be much larger than the piece that is being hidden. However you came into ownership of your new tattoo, please complete the poll below. In the end, some of those crappy, faded tattoos we all sport are the stories of our lives. Considering our lives are full of ups and downs, maybe our tattoos should be, too.

  1. jpg 450w” data-sizes=”(min-width: 675px) 450px, 450px” data-thumbnail=”https://images;
  2. saymedia-content;
  3. com/;
  4. image/c_fill%2Ccs_srgb%2Cg_face%2Ch_80%2Cq_auto:eco%2Cw_80/MTczODA2ODc2ODE0MDI2Mzc5/how-to-coverup-an-old-or-bad-tattoo;

Just take your time to find that awesome tattoo artist that’s just right for you. Don’t scrimp on the dollars for the tattoo artist and the after-care procedures you follow. Hope it all goes well. This content is accurate and true to the best of the author’s knowledge and is not meant to substitute for formal and individualized advice from a qualified professional.

© 2013 Anne Roy Vandal on September 20, 2019: I have bad tattooing all over my body and i need it to become art ive lived with this shit for over 12 years god help me find a tattoo artist that can help me.

Henry joute on August 23, 2018: How much will it cost me one right full hand? Lau chi han on August 23, 2018: Can u design for me to cover up my old tattoo at back side Funnygaming on December 30, 2017: My tattoo ink look faded (in it 4 month later), mostly the black look like a light gray and was suppose to have many different colors but it end up looking the same mudy blue everywhere no green or purple for my butterfly and my lettering was suppose to have a violet pinkish color with a very fine line and he decide to put a grayish lilac and shading at random place.

;/ pandabrian on December 10, 2017: i have a stupid mistake on the back of my head in the form of an ignorant racial emblem. my children and the shame on there faces when your at your daughters 2nd grade parent conferences.

prasamma on September 23, 2017: i want to cover my old tatoo. please help me Sailesh Adhikari on September 13, 2017: I want to cover my old tattoo. Can you help me. Theresa M. Gargano on August 02, 2017: Thank you for providing valuable information regarding the lightening, cover-up, or removal of an undesirable tattoo.

terry jones on June 13, 2017: looks good your cover up GRAMMARPIG 😀 on June 01, 2017: Good article on cover ups. I have an issue with misplaced apostrophes though. When I read something that has them added incorrectly, it diverts my attention off of the message and on to the grammar mistakes! PLEA’SE U’SE APOSTROPHE’S RE’SPONSIBLY.

🙂 Sarah on September 21, 2016: I looked up to find a way to fix some crap job wings the artist left with with after they took my car as a payment, refused to give it back then totaled it. on January 02, 2016: I had a tattoo done on my 18th birthday. I knew what I wanted and somehow got bullied into a design the artist (and my mother’s ex) told me “would be just fine.

  • ” Being naive and stupid, I went with it and hated it;
  • I then went to another artist who did a horrible job in trying to cover it and I ended up with a monstrosity of black ink on my upper back;
  • Is it possible to cover faded black ink with colored ink? I have been trying to fade the ink over the past seven years;

Anne (author) from Hobart, Tasmania ~ Australia. (The little bit broken off the bottom of AUS) on November 12, 2013: Thanks for your links missl0ng123 – understand about wanting to have one covered up! hope he gets it soon, it just makes things. better in the mirror! 😉 Michele Kelsey from Edmond, Oklahoma on November 11, 2013: Good hub.

I am wanting my man to cover up a tattoo, so this is great information. Shared the link to my Facebook friends. Well covered topic. Anne (author) from Hobart, Tasmania ~ Australia. (The little bit broken off the bottom of AUS) on November 09, 2013: Thanks heaps Manicpanicplease! Really love those photo’s shows how awesome a tattoo can look these days! L Brander from Canada on November 08, 2013: Cool hub, I loved the photos you used.

Voted up, interesting & useful. Anne (author) from Hobart, Tasmania ~ Australia. (The little bit broken off the bottom of AUS) on November 03, 2013: Thanks for your feedback. And yeah, me too with the cover-up tattoo! lesliebyars on November 03, 2013: Nice hub.

Is black skin harder to tattoo?

Not true, says Michaels, and actually comes from artists who don’t know ‘how to properly design tattoos for darker skin,’ In fact, he says, dark skin is often ‘softer’ and while it can be tricky to see ink on especially dark skin during the tattooing process, it can also be ‘significantly less work and less demanding’.

What is black tattoo ink made of?

Tattoos have quickly gained mainstream popularity in the last few years. In fact, 45 million Americans, including 36 percent in their late twenties, have at least one tattoo. It’s becoming more and more rare to not tattoos. Although tattoo inks are not something we are doing every day, like toothpaste or deodorant , it is still important to be aware of what carcinogens may be lurking in them.

Do those chemicals have long-term effects? How toxic are they? What we can do to get safer tattoos? Just like personal care products and other cosmetics, the FDA does not regulate or approve any tattoo pigments  for injection into the skin.

This includes UV and glow-in-the-dark tattoos. Even Henna isn’t approved for skin injection, just for hair dye. State and local authorities are charged with regulating tattoos in their area, but the FDA does have the authority to investigate safety concerns if needed.

Only recently, with the growing number of tattoos, have the FDA shown some interest in the safety of ink. Unfortunately,  like fragrance , tattoo ink recipes may be proprietary, and therefore are not required to list their ingredients.

So consumers are left to do their own investigations. Some recent studies  have been done to see the possible long-term effects of tattoo inks. These studies are few and far between, but are the beginning of really getting to know the possible skin and health reactions to tattoos.

  1. Some fairly common reactions to tattoo ink include allergic rashes, infection, inflammation from sun exposure, & chronic skin reactions;
  2. These reactions could be linked to the presence of harmful chemicals in most mainstream tattoo inks;

Phthalates  and benzo(a)pyrene  are two of the most harmful chemicals present, both having been linked to cancer and endocrine disruption. They can also be found on the EPA’s carcinogen list. Black ink is often made of soot, containing products of combustion, called hydrocarbons.

Black ink can also contain animal bones burned down into charcoal. That’s right,  not all inks are vegan. Some ink also contains animal fat as the carrier, as well as gelatin and beetles. Heavy metals are often present in colored inks.

Colored inks can contain lead, cadmium, chromium, nickel, and titanium. These metals can trigger allergic reactions and potentially lead to disease. Scientists are unsure of the exact effects. Scientists have seen possible connections with tattoos to skin cancer , but the overwhelming conclusion is that they are unclear of the role of tattoos and cancer.

There have been rare cases of skin cancer malignant tumors found in tattoos, but scientists say these could just be a coincidence. There are even theories that phthalates clear the body within hours  and could be the case with tattoos since they are not continuous, like some phthalate exposures.

One question the FDA has tried to answer is,  where does the pigment go when it is faded  by sunlight or removed by laser light? Are they flushed out by the body? Or disbursed throughout our body somehow? Some of the ink could be absorbed into the bloodstream.

  1. Making it possible that getting a tattoo removed can be even more dangerous than the original;
  2. These are questions that will hopefully start being answered and lead to more studies conducted about the toxicity of tattoo ink;

The good news is that as the demand for tattoo has spread, so has the variety of inks offered. There are many tattoo ink brands that are willing and able to tell you what is in their products. And they are made with safer ingredients. Another way to stay safer is to choose your artists wisely.

  1. Do your research and see what artists are conscious about their inks and willing to talk to you about it;
  2. The best non toxic carriers to look for in ink ingredients are vegetable glycerin ,  witch hazel, water, or ethanol;

You can also avoid certain ingredients  in ink pigments that are seen to be “riskier” than others. Red pigment often causes the most skin reactions and is considered the most dangerous  because it contains cadmium, mercury or iron oxide. Choose a red ink with naphthol instead.

Choose Carbazole or Dioxazine for this pigment, try to avoid manganese violet. Choose Arylide or Tumeric based pigments. Copper pthalocyanine pigments are the safest choice for both of these. Specifically Monoazo for green and sodium based for blue.

Just watch out for iron oxide. Avoid animal based inks that are often referred to as “India Inks. ” It is better to use black ink derived from logwood and magnetite crystals. Just like many things we put on our bodies, the effects of tattoo ink are unknown.

What pen ink is safe for tattoo?

Posted on September 07 2020 Here’s a quick fire guide for those looking to become part of the stick and poke world! Enjoy. What is a Stick and Poke? A stick and poke is a DIY way to create tattoos. it’s a modern version of what people have been doing for years, having a go at creating their very own designs! What do you need for a Stick and   Poke? You will need a needle, thread, skin, ink, and all the precautions to make it safe and sterile.

(things like boiling the needle, wearing protective gloves, using alcohol on the skin etc. ) What needle should I use? You can use a normal sewing needle but a tattoo needle works the best. We recommend not using a hollow piercing needle or a safety pin.

Try to be sensible! What ink should I use? Tattoo ink is the best, but non toxic india ink (such as Higgins, Speedball or Winsor and Newton) works well also. These are all easily available on the internet. Stay away from pen ink and inks that may be toxic.

  • Other inks may work, but if you want to get the most from your design and it be safe, tattoo ink is definitely the way to go;
  • How long will these tattoos last? Depending on how deep you poked and the type of skin it was applied on, they should for a really long;

Although this is contradicts popular opinion, you should not think of these as temporary tattoos. How deep should I poke? Our opinion is that you should never exceed 1/8 of an inch. You should feel a pop of the skin while you’re doing it, when you do, don’t go much past that point.

  • You’ll quickly see the results if you’ve gone deep enough so don’t rush it;
  • Don’t overdo it! You don’t want to damage the skin or bleed too much during the process;
  • What should I do for after care? Keep it clean with anti bacterial soap;

If possible, also try to stay out of direct sunlight too. Generally, the aftercare is very similar to a professional tattoo..