How To Set Up A Tattoo Gun?

How To Set Up A Tattoo Gun

Lining and Shading Tattoo Guns: Difference in Use – How To Set Up A Tattoo Gun As a beginner, you might get confused about the use of various types of tattooing machines intended for different tattooing styles and techniques. Thus, there are liners and shaders that look pretty much similar at a glance. However, they are not the same and to understand how to use those machines, it’s necessary to know the difference in setup. In a word, the liner is meant to make outlines and the shader is used for applying inks and pigments to the skin.

  • Needles. The most noticeable difference is in the number of needles and their configuration that is how they are positioned in the bar. The liners use from one to seven needles set in a circle while shaders accommodate more than four needles set up in a straight line.
  • Power and speed. Usually, liners run faster for better precision and shaders require a higher voltage to penetrate the skin and get a lasting color. Hence, shaders might produce stronger vibrations you will need to get used to.
  • Coil type. When setting up a tattoo machine for shading, the common rule is to use a higher wrap coil to produce enough power for multiple needles. So, the shader needs a 10 to 12 wrap coil and for the liner, an 8 wrap coil will suffice. And you will need to adjust the gaping between the front coil and the armature bar by changing the rear spring tensions and adjusting the front screw.
  • Machine weight. That’s what will impact your work the most. Shaders are a bit heavier than liners. Thus, to achieve the consistently high quality of work and avoid mishaps or mistakes, you’ll need to practice working with lighter and heavier machines.

To sum it up, though tattooing might seem like something you’ll never be able to handle, in practice all you need is a firm hand and a good piece of duly set up equipment. By starting with some simple images, you will hone your skill and eventually, you’ll be able to create real multicolor masterpieces on the human body..

What should my tattoo gun be set at?

Step 4 – Set the speed of the tattoo machine for line work. Some machines display a readout of voltage. Six volts is appropriate for lining. Most tattoo artists adjust voltage by listening carefully to the sound of the gun–it should produce a steady buzz or a hum.

What voltage should a tattoo liner run at?

Thanks For Submitting Your Message! – Check back here to see your message once we’ve reviewed it. What voltage do people use for lining and shading when using a tattoo pen? Submitted by: Gary John Wood 2 years ago 1 Answers Reading Time: < 1 minute Hi Gary, voltage settings are always depending on your style of tattooing, the machine you are using and your personal taste. You should take time with your machine to find out which voltage is the right for you and the machine. Generally most artists use voltages around 7v-9v for lining (8 should be a good start) and 8-10v for shading. Please login or Register to submit your answer Want to know something you can't find here? Ask A Question.

How deep do you go when tattooing?

So, Where Should The Needle Go? – The tattoo needle should go into the dermis layer of the skin. This layer lies in the middle, and is the perfect spot for ensuring the ink will stay in the skin, and not ‘bleed out’ as the tattoo heals. The epidermis is not a good ink location since it is too exposed and too outward, while the hypodermis is too deep into the skin, which means the ink won’t be as visible and the pain during tattooing would be twice as intense.

  1. Also, if the needle penetrates the hypodermis, the client will most certainly experience an infection;
  2. So, how deep, to be exact, should a needle go into the skin? The answer is – approximately 1/16th inch deep into the skin;
You might be interested:  When Can I Shower After A Tattoo?

This means that the ink will be placed exactly between the 2mm of the dermis layer. If you’re wondering how a tattoo artist knows where the dermis layer is in the skin, we’ve got you covered with that as well. Before the tattooing process begins, the tattoo artist adjusts the tattoo machine and the needle in regards to the parameter of the dermis layer location.

So, the dermis layer is approximately 1/16th inch deep into the skin. With that knowledge, the tip of the tattoo needle is adjusted to only enter the skin at such depth, not a millimeter shallower or deeper.

This means that the tattoo needle should not stick out the tattoo machine more than 2mm, or less than 1mm.

How far should a tattoo needle be out?

Proper Tattoo Needle Depth 2010-12-09T05:40:48-08:00 Setting Proper Needle Depth Skin has a total of 3 layers: Epidermis (composed of 5 sublayers), Dermis and subcutaneous tissue. The tattoo needle depth should penetrate into the Dermis layer. If the depth is too shallow, it will only penetrate into the epidermis sub layers and the ink will “bleed out” as the tattoo heals. This is because the 5 sub layers of the Epidermis is constantly growing outward to the top, any ink deposited will just be shed back out.

If the depth is too deep, you will be causing unnecessary pain to your client and run the risk of infection. The dermis layer of skin is between 1mm and 2mm into the skin. So when you are adjusting the tattoo machine, you will have to adjust within this parameter.

With the needle, grip and proper tip (e. 3RL needle will go with a 3RT tip) on the tattoo machine, adjust the depth by adjusting the depth of the tip. Make sure you hold down the armature bar so that you are adjusting the tip at the point where the needle is in its down position.

You might be interested:  How Many Laser Sessions For Tattoo Removal?

The tip of the needle should not be sticking out anymore than 2mm and no less than 1mm. Keep in mind that every person’s skin type is different and there is no exact measure. If during your tattoo there are excessive amounts of blood, it is obviously going in too deep.

Practicing on fruit is a good method before trying on human skin. If the fruit is being badly damaged while you are puncturing the skin, the depth is going in too deep. By David H..

What you need for tattoo set up?

What’s the best needle for lining a tattoo?

Flat Tattoo Needles – Flat needles are needles that are soldered in a straight line to a needle bar. These needles are the most popular for lining because their shape lets them deliver more ink to the skin. This means clearer, darker lines with just one stroke. Larger flat needles can be used for color fills and deliver more quickly with just one pass. Flat needles are marked FL (Flat Liner) or, less often, FS (Flat Shader) for short.