How To Make A Temporary Tattoo With Pen?

How To Make A Temporary Tattoo With Pen
If you wish to get a tattoo done, but don’t want a permanent one, why not design a DIY temporary tattoo? To start, zero in on a design you want. Avoid a complicated pattern. Use a gel pen in a dark colour to draw the design. The ink in gel pens is easy to transfer from the paper to the skin.

  • Draw the design on paper such as tracing paper or parchment paper using a pencil, then fill it with colour using the gel pen;
  • Wet a piece of cloth with warm water once you have decided on the spot where you want the tattoo;

Place the design on the skin. Press the wet cloth firmly on the paper for approximately 30 seconds. Slowly and gently peel a corner of the paper to see if it is completely transferred to your skin. Once it is done, remove the cloth and peel off the paper. Let the design air dry, and be careful not to brush it against your clothes or your body.

How do you get pen ink to stay on your skin?

You can flex your artistic muscle and give yourself a tattoo with some simple items stashed away in your house. No, not ink and a pin for an ill-advised stick-and-poke. More like toothpaste and a pen for a sick tat. That’s right, commitment haters: This artistic ink is only temporary.

This viral YouTube tutorial, which has more than 38 million views, demonstrates how to use a pen and toothpaste (plus a few extras) to make a DIY temporary tattoo. While the hack is basically made for a boring quarantine-night-in, the DIY temporary ink is also perfect for testing out new tattoo designs before you call up your choice parlor for the real deal.

Plus, the result is waterproof and all. As the video outlines, the first step is to prep the to-be-inked area by shaving it clean of hair. Then, apply a thick layer of toothpaste to the skin and rub it in. This minty step is said to remove excess oil from the skin and reportedly helps the longevity of your temporary ink.

The video recommends Colgate toothpaste, though it’s unclear if the particular brand has any effect on the final product. After wiping the excess toothpaste off, grab a marker-like pen and get to sketching your ink.

Once you are happy with the design, dust it with face powder or baby powder. This particular tutorial then goes over the design again in waterproof eyeliner for extra staying power, dusting it once more for good measure. To lock the resulting ink in even further, apply one super thin layer of Vaseline, which is known for repelling water.

After drying for 30 minutes, your tattoo is ready to be put through the wringer. That includes pools, showers, gym sessions, and whatever other trouble you could get into. Think temporary tattoos are only for little kids and Coachella baddies? Think again.

Watch the tat tutorial for yourself below: Katie Dupere is an editor and writer in New York City specializing in identity, internet culture, social good, lifestyle and beauty topics..

What materials do you need to make a temporary tattoo?

Can you make a temporary tattoo with regular paper?

Steps Download Article –

  1. 1 Purchase water slide paper. Most tattoo stickers are made with water slide paper, which makes the tattoo stick onto the skin and last. You can purchase water slide paper from a craft store or online.
    • If you don’t have access to water slide paper, normal printing paper will work as well.
  2. 2 Choose a picture online or create your own. You can find a cool tattoo by looking up “tattoo designs” online or create your own using Photoshop.
    • Choose a tattoo that is meaningful to you. You can print out special symbols, a character, or a drawing of an animal.

    Advertisement

  3. 3 Print out your picture. Remember to flip the tattoo before you print it, especially if it contains words, as the tattoo will appear mirrored once you apply it.
    • You can print in colour; however, black works best.
    • Print the picture as big as you want it. If you’re creating batches of tattoos, a smaller size is best.
  4. 4 Cut out your picture. Leave a 1/2 inch rim around the edges. The picture shouldn’t be cut too small.
  5. 5 Soak your picture in perfume. Spray the front and back of the paper with a scented perfume of your choice. Apply a generous amount.
  6. 6 Soak the picture in hot water for three minutes. Fill up a sink or small bowl with hot water and place your picture gently on top. Gently push the picture to break the water’s surface and let it sink.
  7. 7 Allow the paper to soak for three minutes. It’s helpful to set a timer to remind you to remove the paper. Once the paper has finished soaking, remove it from the water and spray it with perfume again.
  8. 8 Apply the tattoo to your skin. Pick an area where you’d like the tattoo to go, such as your wrist or arm. Spray the side of the paper that you’re sticking onto your skin with perfume.
    • Place the ink side of the paper face down on your skin and spray it with perfume once applied.
  9. 9 Allow the tattoo to adhere to the skin for seven minutes. Once the timer is up, carefully remove the tattoo. Starting from the edges, slowly peel the paper away from your skin.
    • If you have paper residue on the tattoo, wash it off with water, don’t try to rub it off, it will ruin the tattoo.
  10. 10 Gently pat the tattoo dry with a towel. Now you have a brand new waterproof temporary tattoo that should last for up to a month!
    • If you for some reason want or need to remove the tattoo, rubbing alcohol on the skin will wash it off.
  11. Advertisement

Ask a Question 200 characters left Include your email address to get a message when this question is answered. Submit Advertisement

  • Use very hot water when soaking your tattoo
  • It may take a few tries to get the perfect tattoo
  • If you would like to take off your tattoo, put hand-sanitizer on it and rub it off.

Thanks for submitting a tip for review! Advertisement

  • Make sure you are not in an enclosed room when spraying the perfume, it can be toxic to breathe in too much.

Advertisement.

How do you make a pen tattoo?

If you wish to get a tattoo done, but don’t want a permanent one, why not design a DIY temporary tattoo? To start, zero in on a design you want. Avoid a complicated pattern. Use a gel pen in a dark colour to draw the design. The ink in gel pens is easy to transfer from the paper to the skin.

  • Draw the design on paper such as tracing paper or parchment paper using a pencil, then fill it with colour using the gel pen;
  • Wet a piece of cloth with warm water once you have decided on the spot where you want the tattoo;

Place the design on the skin. Press the wet cloth firmly on the paper for approximately 30 seconds. Slowly and gently peel a corner of the paper to see if it is completely transferred to your skin. Once it is done, remove the cloth and peel off the paper. Let the design air dry, and be careful not to brush it against your clothes or your body.

Can you use pen ink for a temporary tattoo?

If you don’t want to mark you skin with a tattoo that will last until the day you die but you would like to wear images on your body there are always temporary tattoos. One way of applying a temporary tattoo is with a ballpoint pen. With it, tattoos can be made for recreational, decorative and commercial purposes.

Ballpoint pen ink can be applied to the skin by an artist and it can be later washed off or left to fade away naturally through the body or from standard friction. Ballpoint ink is, as addition, non-toxic because manufacturing of pens and their ink is regulated in almost all countries which makes practice of temporary tattooing even more safer than standard.

(There is one more connection between ballpoint pens and tattooing: prison inmates modify ballpoint pen components into tattoo guns but this is not the theme of this text). One more type of temporary tattoo is henna tattoo. It is a traditional tattoo of in India, Pakistan and Bangladesh where a paste from a dried henna plant is dissolved in water, lemon juice, or strong tea and used for painting complex forms on skin of hands and feet.

It is applied on the skin with a plastic cone or a paint brush and re-moistened with mixture of lemon juice and white sugar when it starts to dry to get a darker color. When the drawing is finished, whole surface is wrapped with tissue and left like that for 2 to 6 hours.

After the tissue is removed henna will begin to dark from oxidation. This temporary tattoo will last from one week to three and is worn for celebrations, especially marriages. It spread around the world and is popular everywhere as a form of body art. Temporary transfer tattoos or sticker tattoos are also (as their name says) temporary tattoos. They consist of paper that can easily be soaked with water and an image printed in ink that will separate from the paper when it is wet. When it was pressed on the skin wet like that and paper slowly removed, image would stay on the skin but it could be also easily removed.

They appeared for the first time in late 19th century in boxes of Cracker Jack and were painted with food coloring so they were easy to transfer. In 1970s were sold in cereal boxes and inside bubble gum wraps.

In 1980s were invented scratch-and-sniff sticker tattoos. Only problem of those early tattoos was that they tore up easily so they were improved in time. They lasted longer and their images were of better quality. Airbrush temporary tattoo is one more solution for those who want interesting image on their skin – fast and without pain.

  1. These tattoos are of the higher quality (they look almost real) and are applied through a stencil on a skin;
  2. Airbrushes were invented in 1893 and since then used for coloring of a wide palette of things;

Today they are used for tattooing. A stencil with a design is placed over the skin and fixed. Through the opening on a stencil, paint passes and stays on the skin. This kind of tattoo lasts from three to five days..

How do you make your own temporary tattoos?

What can be used as tattoo ink?

Download Article Download Article There are several ways that you can make tattoo ink. Using wood ashes and white liquor to make an organic tattoo ink is a cheap but sterile option. You can also use dry ink pigment with medical grade liquids to make a tattoo ink that mimics what tattoo artists use in their shops. Safety is important when you’re mixing tattoo ink, so make sure you wear gloves and a mask over your mouth and nose.

  1. 1 Burn wood to create ashes. In order for wood ashes to work well as a tattoo ink, you need to completely burn the wood you’re using. The ashes should be totally black, with none of the wood’s natural color still visible. They should also be completely cooled when you use them. [1]
    • Different types of wood will give you a slightly different shades of color when the ashes are used as ink. Lighter woods will produce a grayer pigment; darker woods will produce a blacker pigment.
  2. 2 Grind the ashes. Once you’ve burned the wood of your choice to create ashes, you’ll need to grind the burned wood. You want the ash particles as fine as possible so that they make a smooth and easily usable ink. Advertisement
  3. 3 Choose a clear spirit. To create tattoo ink from wood ashes, you’ll need to mix the ashes with a liquid. Some people recommend that you use distilled water, but this still risks some bacteria getting under your skin as you press the needle in. Instead, use a clear spirit – like vodka or gin – as your liquid base. [2]
  4. 4 Mix them together. Mix your ashes and clear spirit together by blending them in a blender for 10 to 20 minutes. The consistency should be a slurry – a little thicker than water, but thinner than a paste – and should not have any chunks in it. [3]
    • It’s hard to recommend an exact proportion of ashes to liquid for this, since it will depend on how finely you grind up the ashes, the type of wood you use, and the desired pigmentation of your ink. It’s better to add liquid slowly – you can always add more, but you can’t take any out.
  5. 5 Track the ash and liquid amounts. If you’re creating a larger tattoo, make sure you track the ash and liquid amounts you’re using. You’ll likely have to mix up more than one batch of ink, and knowing the exact measurements keeps the pigment of the ink consistent. [4]
  6. Advertisement

  1. 1 Choose your pigment powder. Many tattoo supply companies have pigment powder available for purchase. You’ll need to decide which color or colors you want to use and purchase those colors.
    • It’s best to purchase pigment powder from a tattoo supply company since you can be sure it’s safe. You don’t want to accidentally use pigment ink used in car paint.
  2. 2 Mix witch hazel with propylene glycol and medical grade glycerin. When using pigment powder, you’ll need to add it to medical grade liquids. Mix together 2 pints (32 ounces) of witch hazel (which you can get from most holistic health stores or online), 2 ¼ teaspoons (0. 38 ounces) of medical grade glycerin and 2 ¼ teaspoons propylene glycol to form a liquid base.
  3. 3 Add the pigment powder. Once your liquid base is mixed, add your pigment powder. The amount of pigment powder you use will depend on how bright or subdued you want the color to be. Add the pigment powder slowly – again, you can always add more but you can’t take any out.
  4. 4 Mix in a blender. To mix your ink together, put it in a blender at low speed. If you find your ink is too thick, add a bit more liquid. If it’s too thin, add more pigment. Once your ink reaches your desired consistency, turn the speed up to medium and mix your ink for about an hour.
  5. 5 Store in a sterile container. Once your ink is finished, store it in a sterile, airtight container. You should place the container in a cool, dark place.
  6. Advertisement

  1. 1 Gather your supplies. To apply your homemade ink at home, you’ll need a few supplies: a few very fine sewing needles, a #2 pencil, a ballpoint pen, some sewing thread, matches, and alcohol swabs. You’ll also need your ink!
  2. 2 Wash your hands. Before you begin to give yourself a tattoo with your homemade ink, make sure you thoroughly wash your hands. This means washing your hands well, with soap, for at least two minutes.
    • For some extra cleansing, you can also wipe your hands with an alcohol wipe after you’ve washed them.
  3. 3 Make your needle. You’ll want to prepare your needle for applying your homemade ink by attaching it to a longer handle. This gives you more control over the movement of the needle and makes tattooing easier. Insert the eye end of your thin needle into the eraser of the #2 pencil.
    • You might want to wrap the thread with some tape to give it extra support and make sure it doesn’t move.
  4. 4 Heat your needle. Once you’ve got your needle put together, you’ll need to heat the tip up. Light a match and hold the needle over it for ten to fifteen seconds. Make sure you turn the needle so it heats evenly. Heating the tip of the needle kills any germs on the needle. This can prevent infection when the needle goes under your skin to apply the ink.
  5. 5 Draw your design. Use an alcohol swab to clean the area of your skin where you want to apply your tattoo. Then, using the ballpoint pen, draw on your design.
    • If you’ve never done your own tattoo before, you might want to start with a small design.
    • You should practice your design on paper before you draw on your skin.
  6. 6 Ink your needle. Once you’re satisfied with your design placement and style, it’s time to ink your needle. Simply dip your needle into your homemade ink. Gently tap the needle on the side of the jar or its lid to remove any excess ink. You don’t want the needle to be dripping with ink.
  7. 7 Apply the ink to your skin. Once you’ve got ink on your needle, poke the needle into your skin at any point in your design. To make sure the ink actually stays in your skin, you’ll need to poke through the first two layers of skin. Continue this process along the lines of your design.
    • Your skin may bleed occasionally when you poke the needle through. Some bleeding is normal, but if you notice a lot of blood, stop immediately.
    • You’ll need to reload your needle with ink occasionally. If you notice that the ink color is fading, reload the needle.
  8. 8 Take care of your tattoo. After you’ve finished your tattoo, you should wipe it down gently with water and mild soap and apply anti-bacterial ointment. If your tattoo is in a place that is likely to rub against your clothing, wrap it with clear plastic wrap. Once you unwrap it, clean it with soap and water, but don’t use a cloth. [5]
    • In the days after your tattoo is finished, you might notice your skin dries out quite a bit. This is normal. Just use a bit of fragrance-free moisturizer and rub it gently over your tattoo.
  9. 9 Touch up the design of your tattoo. Your skin will swell when you repeatedly poke it with a needle. Once you’ve finished your tattoo and your skin has had time to heal, you might notice that you’ve missed a few spots. Simply go back and repeat the tattooing process to touch up the areas that you missed.
  10. Advertisement

Add New Question

  • Question Will this ink be able to last up to a year? The maximum that this tattoo ink will probably last up to is maybe 8 months. But it all depends on how you make it, and how you use it, and where you put it. If you put it on your back, which will probably be covered up by your shirt, it will more likely last longer than if you have it all on your arm.
  • Question If I don’t have a blender, what do I do? This may make it a bit harder, but you can try to beat it with a spoon. It will take longer, and it may not make the ink mix last as long. Otherwise, it is okay to use a spoon!
  • Question Can I make tattoo ink from store-bought charcoal? Killian Campbell Community Answer You can, but it won’t last long. If you buy a good and more expensive brand with lots of phosphates, it will last longer than the cheaper brands.
  • Question Is it actually permanent or will it go away within a year? It’s actually semi-permanent and will fade away in a year, more or less. If you want it to last less time, you can try henna tattoos.

Ask a Question 200 characters left Include your email address to get a message when this question is answered. Submit Advertisement

  • In the days after your tattoo is complete, you might notice that scabs form, and that your tattoo might bleed a bit. This is normal. Don’t peel the scabs off – they’ll come off naturally in subsequent cleanings.
  • Your tattoo will remain swollen and sore for a few days. It might also feel warm to the touch. This is normal.

Thanks for submitting a tip for review! Advertisement

  • Make sure you’re using ink pigment created specifically for tattoos. Some websites will sell ink pigment without noting that they’re actually for things like car paint. Buying your pigment from tattoo websites is the safest route.
  • If your tattoo stays red and swollen and sore more than 2 days or so, seek medical attention. You might be having an adverse reaction to the tattoo.
  • Use gloves and a mask when you’re mixing tattoo ink.

Advertisement.

How do you make tattoo ink with Vaseline?

Download Article Download Article Whether you’re tattooing in prison or just on a budget, you can create “prison-style” tattoo ink using baby oil, charcoal, and a bit of water. Be aware that this is neither a safe nor a certain substitute for actual tattoo ink. Do-it-yourself tattooing is illegal in most prisons, and it can open you up to the risk of serious blood infections. People do, however, use the following recipe to make a basic ink.

  1. 1 Find a can or metal container. It should be able to hold 4-6 ounces of baby oil, along with a bit of balled-up cotton. Try using a clean, empty boot polish can. If you don’t have access to a pre-made container: use a sharp implement to shear a 12-ounce aluminum can in half, and use the bottom half as your container.
    • You may be able to buy a boot polish can from the prison commissary. [1] If you can’t find boot polish, look for another suitable can that you can buy. It’s important that you don’t arouse suspicion from the guards, so don’t buy a can of something that you would never normally use.
  2. 2 Put cotton inside the can. If you have access to cotton, ball it up inside the can as a “wick” to help ignite the baby oil. Make sure to leave at least a bit of the cotton dry and oil-free so that it will be easier to light. Use cotton balls, if you can, or tear a small strip of cotton from a shirt or pillowcase.
    • Try cutting the sleeves off your shirt. This way, you can use the cotton without arousing suspicion or completely ruining the shirt.

    Advertisement

  3. 3 Douse the cotton with baby oil. You should be able to buy this oil from the prison commissary. Use enough baby oil to completely saturate the cotton, and make sure not to spill. You will burn this oil to create a black, sooty powder: the base ingredient of your tattoo ink.
    • In the absence of baby oil, you may be able to use Vaseline or another petroleum-based substance. Do not melt poly fiber plastics, as these chemicals will irritate your skin. [2]
  4. 4 Build a “soot collector”. Find a flat, clean piece of metal that will fit over the opening of the can without covering it completely. If you can’t find anything else, try cutting a sheet from the top half of the aluminum can, then pressing it until it is flat. This piece will collect the sooty powder so that you can mix it into ink.
  5. Advertisement

  1. 1 Make fire. Use a lighter or matches, if possible. If you are in prison, however, you may not have access to a traditional fire-starter. Find a way to make fire without a lighter. You will need fire both to make the ink and to disinfect the needle.
    • Try “popping a socket”. Open up an electrical socket, then hold a pencil tip and a wire up to the charged interior. This will create a spark. Hold a piece of paper or tissue against the spark until it catches flame. [3]
    • Be very careful when handling flame. On one hand, you might badly burn yourself or start a fire that you can’t control. You also run the risk of attracting the attention of the guards.
  2. 2 Burn the baby oil and cotton. Use the cotton (or paper) as a wick: light a dry corner of the flammable material, and let it ignite the oil. Arrange the metal sheet or “soot collector” so that the smoke hits it. As the baby oil burns, the metal sheet will blacken with soot. Let the baby oil burn until it is spent, and let the metal cool before handling it directly.
    • Be prepared to burn the baby oil several times. The burning process does not produce a lot of powder, so you may need to burn the oil several times until you have enough to harvest.
  3. 3 Save the black powder. Use a paper or plastic card to scrape the black powder from the metal sheet. Do not use a razor or another metal scraper to remove the soot – the metal might leave shards in the powder, which will then wind up in your skin. Start by scraping the powder onto a clean, smooth surface or a white piece of paper.
    • Do not expose the powder to any moisture until you’re ready to mix your ink.
    • The metal sheet and canister will be hot from the flame. Do not handle the metal directly until you’ve given it time to cool. Avoid using a credit card to scrape soot from hot metal, as the edge of the card might melt into the powder.
  4. Advertisement

  1. 1 Put the tattoo powder into a small cap or container. Many prison tattooists use a clean toothpaste cap. Fill the cap about halfway with the sooty powder, and leave enough room in the container to mix in water. If you collected the soot on a sheet of paper, you can fold the paper and let the soot slide directly into the cap.
  2. 2 Add water. Mix the soot with a drop of clean water. Be very sparing with the liquid-to-soot ratio; a bit of water goes a long way. Start with a small dose, and mix the soot together with the water in the toothpaste cap. Consider adding a bit of clear, scentless baby oil to thicken the mixture.
    • Remember: the soot is much harder to come by than water or baby oil. It is a limited resource. Be very careful with your mixing so that you don’t need to make more soot.
  3. 3 Finish mixing the ink. Stir the soot-and-water mixture until it is about the consistency of a pen’s ink. If anything, the ink should be slightly thicker. Adjust the portions of each ingredient until the texture is just right. To thin your ink, add a dash of water or baby oil. To thicken it up, add more soot.
  4. Advertisement

Add New Question

  • Question Can I use normal pen ink? No, you cannot use normal pen ink as it can poison you if it gets into your blood stream.
  • Question Is there a way to make a tattoo needle? To make a tattoo needle, start with a pencil. Put a needle on the side of the pencil and wrap a thin string around it. (A lot of string. ) Make sure that the string goes near the tip of the needle, but not too close. The string is used to hold extra ink so that you don’t have to keep going back to the ink cup.
  • Question Do I need baby oil and shampoo, or could I just use soot and water? You don’t necessarily need the shampoo, but the baby oil is required to turn the soot into ink.
  • Question Can normal pen ink work? You’ll run the risk of an infection, or having a very bad-looking piece of art.
  • Question What kind of ink can I use for at home tattooing? You can use waterproof Black India ink from a local craft store. It comes in a small glass bottle with a dropper built into the lid. Thicken it up with ashes to desired consistency and start scratching.
  • Question Does the “soot collector” have to be metal? Not necessarily, but it has to be able to withstand fire, so it can’t be anything like plastic.
  • Question What kind of shampoo can I use? You don’t absolutely need shampoo, but the clearest and simplest you can find would be best.
  • Question Other inmates have been burning their ramen for like 9 minutes. Could this be to get ash for ink? When I was in prison I did this by burning the ramen and mixing the ink with baby oil. It didn’t work that well, though, so I wouldn’t recommend this method.
  • Question Can I thicken India ink with baby oil? Yes, you can.
  • Question Will it be permanent? No, it is not professionally done so it will fade pretty quickly, especially if it’s on a place you wash frequently like your hands.

Show more answers Ask a Question 200 characters left Include your email address to get a message when this question is answered. Submit Advertisement.

Is there a painless tattoo?

HUSH Numbing Spray – Anesthetics are introduced to the skin by way of tiny drops or mists. It works immediately upon skin contact, making it a perfect product in keeping a painless tattoo while the artist is concentrating on creating a mind-blowing masterpiece!.

How do you get pen off your skin at school?

Download Article Download Article So that cute girl finally gave you her number by scribbling it on the back of your hand. You’re super excited, except you don’t want to get home and have your nosy little sister start questioning you about whose digits are on your skin. Or maybe you’ve been taking notes at school all day and end up with pen ink smeared all over the side of your hand (this is a daily struggle if you’re a lefty).

  1. 1 Wash the ink off with soap and water. This is probably the easiest and most accessible solution. If the ink is oil-based, as many ballpoint pens are, you may not have much luck, but if the pen uses water-soluble ink, it should wash off right away.
    • Water-based inks tend to seep through paper and take longer to dry, so they are more likely to smear and get on your skin. [1]
    • Roller ball pens and some gel pens are usually water soluble.
  2. 2 Rub vegetable shortening or butter on the ink. It will be kind of gross and may get messy, but the oils in these products will help dissolve the oil contained in the ink. Dissolving the ink will bring it to a liquid state, and when you clean off the butter or shortening with a dry paper towel, the ink should start to come off.
    • This same principal means that oils like coconut oil, baby oil, or olive oil will also help dissolve the ink. Pour some oil onto a paper towel and use it to scrub off the ink.

    Advertisement

  3. 3 Squirt non-gel toothpaste onto the ink and rub it into the skin. Toothpaste contains baking soda, which will pull the ink off the surface of your skin. [2] The toothpaste may cause your skin to tingle. Use a damp cloth or water to rinse off.
    • Look for toothpaste that isn’t see-through (or gelled) or sparkly. It should be an opaque paste and will often be white.
  4. 4 Rub a cooled, used teabag over the pen ink. After making yourself a cup of tea, set the tea bag aside and allow it to come to room temperature. Once cooled, scrub the ink with the tea bag. It should rub off easily. [3]
    • The oils in the tea, combined with the rough fabric of the bag, will work together to break down and lift the pen off your skin. [4]
    • Don’t be too harsh when you rub the tea against your skin, or you may break the bag and spill tea leaves everywhere. [5]
  5. Advertisement

  1. 1 Squirt hand sanitizer onto the ink and rub in small, circular motions. The alcohol in hand sanitizer will break down and loosen the pen. Wipe the area with a clean cloth and the ink will wipe off with the sanitizer. [6]
  2. 2 Wet a cotton ball or washcloth with isopropyl alcohol (rubbing alcohol or surgical spirit) and scrub the ink off your skin. Rubbing alcohol is often your best bet for removing the oil-based ink found in most pens. It dissolves oils, allowing you to wipe the ink off your skin. [7] Many other cleaning agents use alcohol as the main solvent, so using it straight should give you the best results.
    • Try not to use the rubbing alcohol in a small, confined space, as the smell is very strong. [8]
    • Isopropyl alcohol and its fumes are extremely flammable, so don’t use it around an open flame or heat source. [9]
    • The alcohol will also remove your body’s natural oils along with the pen, so you should moisturize after rubbing it on your skin.
  3. 3 Spray the pen marks with hairspray and wipe them off with a clean towel. If you don’t have rubbing alcohol on hand, look for an alcohol-based hairspray instead. [10] The alcohol will break down the ink. Depending on the concentration of alcohol used in the hairspray, it may take a few applications to remove the ink. [11]
    • The hairspray will leave behind a sticky residue, so once the ink has been removed, rinse your skin with soap and water. [12]
    • Hairspray is highly flammable, so be careful when you are spraying it. You should never use it anywhere near an open flame.
  4. 4 Use a cotton-ball soaked with acetone nail polish remover to rub off the ink. The solvent acetone will cause the pen ink to break down and dissolve, similar to rubbing alcohol. It is also highly flammable like alcohol, and the vapors can be toxic in large amounts, so use in a well-ventilated area.
    • Acetone can be very harsh on your skin, so use it sparingly and be sure to rinse your arm with soap and water and moisturize afterwards.
    • The amount of alcohol in hand sanitizer varies. Look for one that is 60%-90% alcohol. [13]
  5. 5 Spray or wet the area with white vinegar, then use a paper towel to rub away the ink. Vinegar contains the acetic acid, [14] which is an effective solvent that can dissolve oil and many other compounds.
    • Using a rough paper towel will help exfoliate the skin,and remove layers of dead skin cells that are stained by the ink.
  6. Advertisement

Add New Question

  • Question Why can’t I get the ink off with soap and water? Sometimes the ink sticks to your skin, try rubbing shaving cream on it, then washing it again.
  • Question What can I do if I don’t have these things? Try washing it with simple soap and scrubbing your skin with a little bit of pressure while the soap is still on.
  • Question Can I get ink poisoning from drawing on my skin? Yes; however, it is very hard to get it. You’d need massive amounts of ink to contract ink poisoning. Try to stay away from using a Sharpie and don’t draw on a cut or open sore on your skin. A small doodle won’t hurt though.
  • Question Do methods differ if it’s red pen and not ball point? Usually, no. It does differ if it is water based vs. oil-based. Try using your favorite method and if that doesn’t work, rub coconut oil on it and retry.
  • Question How do I get white pen ink off of my hand? Any color ink will work for these methods above.
  • Question What to do when there’s pen on your leg? If soap and water don’t get it off, try applying toothpaste and waiting for the toothpaste to dry before rinsing it off.
  • Question If I draw on myself a lot, is it OK to sleep with the ink still on me? It takes large amounts of ink – and mostly oil-based ink – to actually harm you. To reduce risk of ink poisoning and cancer, use water-based ink, since ink can go through your skin and into your bloodstream on some occasions.
  • Question How do I tell whether ink is oil or water based? If it is more watery and slightly transparent, it is water based. If not, it is oil based.
  • Question If I cut myself and draw over it before it’s done fully healing, will the ink stay in the skin and become permanent? Well, you could possibly get an infection. It’s not a very good idea, I wouldn’t encourage you to do it. The ink could possibly be permanent, but then again I just wouldn’t do it at all.
  • Question What do I do if I get an allergy reaction from the ink? Get medical attention as soon as possible, and try washing the ink off with soap and warm water.

See more answers Ask a Question 200 characters left Include your email address to get a message when this question is answered. Submit Advertisement.

How do you get pen ink off your skin at school?

This video teaches you To get pen off of your skin, try wetting a washcloth with rubbing alcohol and rubbing the ink off with it. You can also try using hairspray, acetone nail polish remover, or hand sanitizer. Even white vinegar can work in a pinch. Another option is to rub an oil, like olive oil, baby oil, or coconut oil, over the ink stain and then wipe it away with a paper towel.

  1. The oil will dissolve some of the oil in the ink so it’s easier to wipe off;
  2. Alternatively, try rubbing some non-gel toothpaste into the stain;
  3. Toothpaste contains baking soda, which can help pull the ink out of your skin;

Whichever method you use, you may need to try a few times before all of the ink comes off. Read the Full Article.

How do you get ink off of your fingers?

5 Common Ingredients for Removing Printer Ink Stains –  Before using any of the following ingredients, it’s important to recognize that they contain chemicals that are not necessarily intended for the uses we recommend. That said, we wouldn’t recommend the following uses if we thought they’d be harmful to you.

  1. Tea Tree Oil:  Tea tree oil is an essential oil that is known to promote skin, hair, and nail health. It’s similar to hand sanitizer in the way it’s applied – gently rubbed into your skin to cleanse it of germs and bacteria. However, tea tree oil also happens to be great for removing ink stains. Simply pour a few drops of tea tree oil onto a piece of dry cloth, then use the cloth to scrub away the ink stain from your skin.
    1. We only ask that you use these ingredients carefully;
    2. Now, onto the list;
    3. You may need to repeat this process to scrub away the ink entirely;
    4. For a more thorough cleaning, we recommend using a brush (in addition to a cloth) to clean between your fingers and beneath your nails;

    Afterwards, clean your hands with soap and rinse with water.

  2. Rubbing Alcohol:  You might already have rubbing alcohol in your bathroom, but you probably haven’t considered leaving a bottle in your office. Rubbing alcohol is highly effective at removing ink stains from your skin. All you need to do is pour a little in your hands and rub your hands together until the ink stain washes away to the alcohol. Then, wash your hands thoroughly with soap and rinse clean.
  3. Hairspray:  When considering how to get printer ink off your hands, you wouldn’t think that a hair product would be of any use. And yet, hairspray is surprisingly good at removing ink stains. So, grab your hairspray and spray some into your hands. Start with just a little and be careful not to spray directly onto the ink-stained area. Once applied, rub away the ink and wash your hands with soap and water. Finally, apply lotion and that’s it!
  4. Nail Polish Remover:  Like hairspray, nail polish remover can be used on more than just your nails. It can also be used to easily remove ink stains from your skin. That’s because nail polish remover contains acetone, which is made to remove another chemical solvent (nail polish). It will quickly and gently remove any ink stain from your skin. Just try not to spill any nail polish remover onto your wooden floors or furniture, or it might quickly and gently remove the finish.
  5. Bleach:  The fifth and final ingredient we recommend using to remove ink stains on skin is bleach. Only use bleach if you don’t have any of the above-mentioned ingredients, as bleach can damage your skin if not washed away afterwards. Plus, bleach smells. If you do decide to use bleach, first dilute it with water (the ratio of bleach to water should be about 1:10).

    We also recommend applying lotion afterwards to moisturize your newly cleansed, ink-free skin. After removing the ink, be sure to wash your hands and apply lotion. Next, rub the diluted bleach onto your hands until the ink is removed.

    And of course, wash your hands with plenty of soap. If the smell of bleach remains, try rubbing fresh orange or lemon juice onto your hands.

How do you get fingerprint ink off your fingers?