How To Draw On Tattoo Transfer Paper?

How To Draw On Tattoo Transfer Paper
The way of using transfer paper for machine transfer: –

  1. Draw the your tattoo design on a sheet of paper, using a gel pen or pencil or merely printing out the design on a printer.
  2. Once the resulting sketch is finalized, insert it in a thermal tattoo printer, which scans the image and transfers it with preservation of the smallest details on transfer tracing paper. Your tattoo stencil is ready!

It is advisable to use this printer in tattoo parlors with high traffic to make the work of the tattoo artist easier.

Can you draw on tattoo transfer paper?

Download Article Download Article Tattoo transfer paper is what tattoo artists use to turn your pencil tattoo design into the guide for your actual tattoo. The most common way to use tattoo transfer paper is use a thermographic type of paper to transfer your tattoo design to your skin. But you can also use printable tattoo transfer paper in certain craft projects.

  1. 1 Create your tattoo design in pencil. Draw the tattoo design you’d like on a regular sheet of printer paper, in pencil. It should look exactly how you want your tattoo to look, because it will transfer exactly that way to the transfer paper. [1]
  2. 2 Slide your original design under the carbon paper. Thermographic transfer paper actually comes in a set of three sheets – an under sheet, a black piece of carbon paper, and a top transfer sheet where the carbon copy will appear. Place the piece of paper with your original design under the carbon paper and on top of the under sheet. [2] Advertisement
  3. 3 Put the whole set of papers through a thermographic transfer maker. This is specialty equipment that you can find in some tattoo shops. Some printing shops might also have the transfer maker you need. Exactly how you feed the papers in will depend on the exact model maker you have, but the design should always go in face down. [3]
  4. 4 Remove the top carbon copy from the rest of the transfer paper. Once you’ve run the transfer paper through the transfer maker, you’ll have an exact replica of your initial design on the top piece of carbon paper. Tear the carbon copy off of the set of transfer paper. [4]
  5. 5 Situate the carbon copy where your client wants the tattoo. It might take a couple of tries to get your design exactly where the customer wants it. Ask them repeatedly to make sure they’re happy with the eventual position. [5] EXPERT TIP Michelle Myles is the Co-owner of Daredevil Tattoo, a tattoo shop located based in New York City’s Lower East Side. Michelle Myles Tattoo Artist & Co-owner, Daredevil Tattoo Consider whether a stencil is needed for your tattoo design. Creating a stencil allows the client to see the design on paper beforehand, and it allows you to move the tattoo around if you need to. However, if you’re incorporating a new tattoo with existing tattoos, sometimes it’s easier to work freehand.
  6. 6 Wet down your customer’s skin with soapy water. Mix up a solution of soapy water – it should be soapy enough that you get bubbles. You can use a regular, mild dish soap. Dip a cloth in the soapy water and then rub it on the skin where the tattoo will go. [6]
  7. 7 Press the carbon copy down onto your client’s skin. Once your client’s skin is wet with soapy water, realign the carbon copy of the tattoo over the skin. Ask for your client’s approval of the placement, and then press the carbon copy down. Use your hands to completely smooth it out. As you do that, press down, to make sure that the design transfers. [7]
  8. 8 Lift off the carbon copy. As you lift the carbon copy away from your client’s skin, you should see the transferred design. If you notice there are places where the design didn’t come through, lay the carbon copy back down gently and press a bit harder. [8]
  9. 9 Repeat these steps if your client isn’t happy with the placement. Ask you client to approve the final placement once the design has transferred. If they aren’t happy, remove the design by wiping down your client’s skin with rubbing alcohol on a cotton ball. Repeat the process to create a new carbon copy of the design and apply it to your client’s skin.
  10. Advertisement

  1. 1 Prepare the surface of your craft. You can use transfer an image to pretty much any sturdy surface: wood, plastic, even canvas. Make sure the surface is clean and that any paint you want to use is dried. [9]
  2. 2 Print your chosen images on printable tattoo paper. You’ll need to download your image (or images) of choice to your computer, and then print them on printable tattoo paper. This paper is usually available at most craft stores, or from online retailers like Amazon. [10]
    • Make sure the image you want to print on the paper will fit onto your craft. You might have to size it down a bit to make it fit.
  3. 3 Apply the included adhesive to your image. The pack of printable tattoo paper will come with an adhesive sheet. Peel the protective layer off the adhesive – it’s usually a bright color like green – and smooth it over the image you’re using. Then trim around the edges of your image, cutting the adhesive sheet down as closely to the outline of the image as possible.
  4. 4 Peel the clear plastic film off the image. With the adhesive sheet on the image, it will now have the layer of adhesive and then a layer of clear plastic film over. Peel this clear film back to expose the sticky layer of adhesive on top of the image.
  5. 5 Place the image picture-side down on your craft. Before you stick it to your object, make sure you have it lined up the way you want it. You can’t unstick the image if it’s a little off-center, so be careful when you’re applying it. [11]
  6. 6 Moisten the back of the image with a wet towel. You can use a cotton towel or paper towel for this step, but a cotton towel works best. Press the damp towel down on the back of the image gently, until the whole thing is moistened. [12]
  7. 7 Peel the backing paper off gently. Start at a corner of the image, and gently pull the backing paper back. As the paper comes back, the image should stay on the surface of your craft. If you notice that the image is also pulling away, put the backing paper back down and remoisten that area. [13]
  8. 8 Seal the image with a glaze spray. This type of spray is available at most craft stores. It will seal the image and prevent any of the ink from flaking off in the future. Let the glaze fully dry before you move your craft – about 30 minutes. [14]
  9. 9 Finished.
  10. Advertisement

Ask a Question 200 characters left Include your email address to get a message when this question is answered. Submit Advertisement.

What do tattoo artists use to transfer a drawing onto skin?

How To Draw On Tattoo Transfer Paper A tattoo stencil is used to accurately transfer a design from paper to your skin. Making a tattoo stencil is easy to do at home but will take some practice to refine your accuracy. Creating your own stencil is a good idea if you are looking to test out designs before involving a tattoo artist. The steps below show how a tattoo stencil will be professionally prepared and applied in a tattoo parlor.

Which side of transfer paper do you draw on?

Download Article Download Article Whether you are transferring a pencil drawing to a canvas, ironing a picture onto a throw pillow, or sticking a custom vinyl on your water bottle, there is transfer paper that can help you. Transfer papers relatively easy to use, but different crafts require very different transfer methods and materials. Identifying what you want from your project will help you know what kind of transfer paper to purchase, and how to use it properly.

  1. 1 Make a copy of the image to be transferred. [1] If you are working with an original image or drawing, you should make a copy to use for transferring the design. Transfer paper will require you to push down and trace over your design, which could ruin an original drawing. [2]
    • If you are not working with original art, simply print out or draw a template for the image, pattern, or text you plan to transfer.
  2. 2 Clean the surface of the receiving object. Transfer paper works on a number of surfaces, including ceramics, wood, canvas, drywall, and many others. No matter what surface you work on, though, it needs to be clean. Take a microfiber towel or other soft rag and wipe down the surface of the object. This eliminates dirt and dust. [3] Advertisement
  3. 3 Cut your transfer paper to size. Your transfer paper sheet should be slightly larger than the design you plan on transferring. Use your print-out of the design as a guide to cut your paper to the appropriate size for your transfer. Cut using sharp scissors or a precision knife to ensure that the edges of the paper do not rip or snag. [4]
  4. 4 Align the paper with the dark side down on the receiving surface. [5] Place your transfer paper over the spot on the receiving object where you want to transfer your design. The dark side of the transfer paper should be facing the receiving surface. [6]
    • Some people find it helpful to use masking tape or drafting dots to hold down the paper so that it does not move while you are tracing the design.
  5. 5 Set your design on top of the transfer paper. Place your design pattern or image on top of the transfer paper. Make sure it is aligned properly before you begin the transfer process. You may opt to use masking tape or drafting dots to hold down the design while you trace. This will prevent your design from sliding and give you the best possible transfer. [7]
  6. 6 Trace your pattern or design. [8] Using a ballpoint pen or a stylus, trace your pattern or design. Be sure to press down firmly, as this will ensure a better transfer onto the receiving surface. [9]
    • Some people opt to use a pen with a specific ink color like red or purple to trace the design. This way, they can see what parts of the pattern they have already traced as they go through the design.
  7. 7 Remove the image pattern and transfer paper. [10] Once you have completely traced the image, you can remove both the image pattern and the transfer paper. Your design should now be visible on the receiving surface. [11]
    • Remember that transfer paper does not provide permanent markings in most cases. You will still need to draw, paint, glaze, burn, or use another tool to make the marks permanent. The transfer paper simply gives you an outline with which to work.
  8. Advertisement

  1. 1 Print out your vinyl. You can do this on your home die-cutting machine, or you can send your design to a professional print shop that offers vinyl stickers. Print out your intended vinyl text or design in your chosen color or colors. [12]
  2. 2 Clean the receiving surface. Before you get started with the transfer paper, you need to make sure that the surface on which you will be placing your vinyls is clean. Use a microfiber cloth or another soft, residue-free rag to wipe away any dirt and debris. Do not wet the surface, as this could prevent the vinyl from adhering.
  3. 3 Remove the background from your vinyl. If your vinyl still has its background intact, carefully peel away the background, leaving only the design or text that you want to transfer. Do this slowly, as you do not want your vinyl design to stick to the background. Some people find using a tool like a seam ripper or orange stick to be helpful in lifting the vinyl background. [13]
    • Many vinyl print shops will remove the background for you. It is alright if your vinyl does not still have the background intact.
  4. 4 Apply the vinyl transfer paper to the vinyl. Peel the backing off the vinyl transfer paper, and press the transfer paper on top of your design. Use a scraper tool to smooth the transfer paper over the vinyl and ensure that it sticks properly. [14]
  5. 5 Align the transfer paper on the object. Once you have rubbed down the transfer paper, slowly peel it back, ensuring that the vinyl comes up with it. Then, align it over the surface on which you want to transfer the vinyl design. Gently press the vinyl and transfer paper down with your hand so that it sticks to the receiving surface. [15]
    • Pressing lightly ensures that the vinyl is not completely stuck down. This way, you can adjust or reposition the vinyl if necessary before final transfer.
  6. 6 Use a scraping tool to press the vinyl down. Once you have your vinyl in place, use a scraping tool or your fingernails to run the vinyl onto the receiving surface. Then, slowly peel back the transfer paper, taking caution to make sure the vinyl sticks to the receiving surface. If the vinyl is sticking to the paper, use your scraper or fingers to press it down harder, then continue to peel. [16]
  7. Advertisement

  1. 1 Wash your fabric. Your design will stick better if you wash the fabric, or use a pre-washed fabric. Wash your fabric in accordance with the manufacturer recommendations and allow it to dry completely before transferring any design onto it. [17]
  2. 2 Print your heat transfer design if you are using a photo or intricate design. If you are transferring a photo or intricate design, use a printable heat transfer paper. This allows you to print out your design directly from your computer using a heavy paper setting. [18]
    • Remember that your design will be mirrored when you print it, so if you are including text or want to preserve direction in your image, you will need to flip it horizontally in a photo editing software before printing.
  3. 3 Print a template if you are transferring a solid pattern. If you are transferring a simple pattern in just 1 or 2 colors, you can print your template directly on your heat transfer vinyl sheets. Then, use a precision knife or scissors to cut out your design. [19]
    • Remember that your design will be mirrored when you print it. If you are including text or want to preserve direction in your design, you will need to flip it horizontally in a photo editing software prior to printing.
    • If you have a die cutting machine, you can use it to cut your vinyl design, instead.
  4. 4 Arrange your design on the fabric with the backing facing up. Once your design is prepped, arrange it on your fabric. Once you start to iron on the pattern you cannot move or rearrange it. Take time now to ensure everything is where you want it. Make sure that the backing is facing up, as you want to iron the backing, not the vinyl. [20]
  5. 5 Use a hot iron to transfer your design. Different transfer papers require different heat settings, so be sure to check the manufacturer’s requirements to properly heat your iron. Then, slowly move the hot iron over the backing. Typically, you will want to hold the iron over each part of the design for 10-20 seconds to ensure that it sticks completely. [21]
    • Be sure to cover the whole design with the iron. Parts of the design that don’t get heat won’t transfer correctly.
    • You may want to stick a thin towel or a piece of parchment paper in between the transfer paper and your iron to prevent wrinkles or scalding.
  6. 6 Peel off the backing. Once you have finished using the iron on your design, allow it to cool for 30-45 seconds. Then, peel off the backing to reveal your newly completed design. If you find any parts of the transfer still sticking to the backing, run your iron over them again before continuing to peel. [22]
  7. Advertisement

Add New Question

  • Question Which side of transfer paper do you draw on? Kathy Leader is an Artist and the Owner of The Art Process. With more than 36 years of art education experience, she specializes in providing mixed media art workshops for individuals and groups. In addition, she works with businesses and organizations to build morale, encourage creative problem solving, and find de-stressing tools. Make sure to always draw on the white side! The color on the other side will transfer to the paper.
  • Question After using transfer paper onto wood is there a way to remove the markings from the wood? I messed up and need to remove what I traced? You could use nail polish remover. Just dab it in a cloth and rub it gently on the surface to remove the markings.

Ask a Question 200 characters left Include your email address to get a message when this question is answered. Submit Advertisement.

How do I transfer a drawing to skin?

Step 5 – Lay your drawing over top of the moist area, and apply pressure to the drawing. Continue to press the drawing onto the skin until all the lines have become transferred.

How do you use pencil to transfer images?

Ever wanted to transfer an image or a drawing from one surface to another?  On this page, we’ll explore your options for image transfer and I’ll show you how you can transfer an image without buying an extra product. Many people think that once you have an image on a surface, it can’t transferred to another surface.

Depending on the surface, a transfer is usually possible. Artists often need to transfer drawings between surfaces. For example, there is often the need to transfer a drawing from a sketchbook to a canvas or other surface.

Transferring the image prevents the artist from having to draw the image over. Transferring images is relatively easy to accomplish. There are products out there that make transferring images or drawings a breeze. Carbon paper or transfer paper allows for easy transfers from surface to another.

  1. Transferring an image with carbon paper only requires placing the carbon paper between the image and the finished surface, and then tracing on the image with a blunt point;
  2. The pressure applied to the carbon paper transfers the carbon material on to the finished surface, transferring the image;

This material is not always practical, however, as the carbon that is transferred is often hard to erase or applied to the surface too dark or heavy. Also, when the need arises to transfer the drawing, you may not have any carbon paper lying around.

Well, at least most of us don’t. Fortunately, there is an easy way to transfer drawings or images from one surface to another and it probably won’t require that you buy any new supplies. All you need is a soft graphite pencil or stick.

Take the graphite and cover the back of the surface of the drawing that you want to transfer. This is called “carboning” the surface. Lay the drawing down on the surface that you to transfer the drawing to and then just trace the image. The soft graphite will transfer a “ghost” image to the surface. DOWNLOAD VIDEO The Secrets to Drawing Learn the fundamental concepts to drawing in a variety of mediums through a variety of subjects. LEARN MORE Like this lesson? If so, join over 30,0000 others that receive our newsletter with new drawing and painting lessons. Plus, check out three of our course videos and ebooks for free. More Lessons You’ll Love.

Can I paint on transfer paper?

Tips for using transfer paper – If you’re not sure whether you’re pressing too hard or too soft, gently and carefully lift up a corner of the reference photo and transfer paper to see what’s going on underneath. (Be careful to only lift up a tiny piece, because you don’t want to throw everything out of alignment.

  1. ) You need to use just the right amount of pressure;
  2. If you press too lightly, the image won’t transfer very well;
  3. If you press too hard, the transferred lines may be too dark;
  4. Dark lines are not a problem if you are painting, as you can just paint over them, but the excess graphite will smudge when painted over;

If you will be creating a drawing, then take care not to press too hard. When you’re finished, slowly release the artist tape from the canvas, lifting each corner one by one. I recommend inspecting the tracing closely as you lift each corner. Leave one side still taped to the canvas to form a hinge (as in the cupcake example above), so that if you see some part that you may have overlooked, you can try to replace the graphite paper and reference photo and redo that area.

Graphite paper can be smudgy, so wash your hands immediately after removing the paper from your canvas. You don’t want extra smudgy fingerprints on your canvas (or clothes or anything else for that matter!).

If you make a purchase via the links below I receive a small commission, which helps support this site. Since graphite paper can be smudgy, the trace can be smudgy as well. Therefore if you’re not planning to paint or draw on it right away, make sure to leave it someplace where it won’t be disturbed and nothing will rub against it.

One idea is to carefully wrap it in glassine and tape a piece of foamboard to the front of the piece, to act as a protective barrier. If the graphite is too dark upon your canvas or paper, simply use a kneaded rubber or other eraser to blot out the excess graphite.

Really, all you need is a hint of a line to remind you what goes where. Dark lines aren’t necessary! Likewise, don’t allow dust to settle on your canvas, because if you try to wipe or brush off the dust, you’ll smudge the graphite tracing. Big mess! You can reuse graphite paper a few times before the graphite wears out, so it’s economical to save a sheet and use it a few times!.

Can you use Sharpie for tattoo stencil?

We’re here to shed some light on “freehand tattooing. ” In today’s age, tattoos have taken more of an artistic route. Gone are most of the dark and seedy street street shops. We’re seeing true artists master the craft of tattoo. Custom tattooing and freehand work has become the true definition of a “good shop.

  • ” So what exactly is freehand tattooing and how does it happen? We are here to show you the process of drawing on the body and designing custom tattoos;
  • From Sharpies to Skin freehand tattoo creation is an extraordinary art form;

A freehand tattoo is drawn on the client and then tattooed. We sketch directly on the skin with markers instead of transferring a stencil. This technique can help with the natural flow and shape of the body. This is the best way to take on curvy or angled areas.

  • Also, when a client wants to add to an existing tattoo, the new tattoo can be easily tailored to the empty space;
  • There are many great reasons to draw directly on skin;
  • let’s start with these;
  • You get an absolute original tattoo design;

Something that no one else can have because it’s drawn directly for you. It helps artists express their ideas and it flows directly on the body shape. You can use the muscles and curves to enhance the design. You can see directly what the artist is creating.

  • Together you can make decisions and additions to your piece;
  • It’s also easier to modify and erase ideas as the design progresses;
  • Not all tattoos can be drawn on paper;
  • Trusting your artist with a custom tattoo is a wonderful freedom;

Designing it in markers can provide a risk-free approach to concepts before getting the permanent tattoo. Here is the process in creating an original design on skin. First we cleanse the area to eliminate any natural body oils. Starting off with clean skin is always important and it allows the markers to flow gracefully.

  • Next we begin the drawing with the lightest color and sketch the basic form;
  • As the details progress we will use a variety of colored markers working from light to dark and gradually build the detail in the design;

Then to end we refine it with darker tones to ready it for the tattooing. Usually, this can take anywhere from 30 minutes to an hour. Sharpies, although permanent, are easily erased with tattoo soaps or alcohol. Once the official design is created, the client and artist can inspect the areas thoroughly and make any final decisions before starting the tattoo.

Once everyone is excited about the creation we’re ready to go. The tattooing will lightly go over the on-skin drawing. As we tattoo the sharpie will gently wipe away leaving the client with a beautiful original new tattoo.

Going from Sharpie to skin offers a tattoo creation that is original and unique. It can compliment your body’s shape and create an amazing flow with the design. We strive to create on-skin whenever it can enhance a tattoos possibilities. Tattooing has become an incredible art form.

Do you use Vaseline while tattooing?

During the Tattooing Process – Tattoo artists use Vaseline when tattooing because the needle and ink are creating a wound. The wound needs something to help heal, and Vaseline can act as a protector for your skin. While it may not prevent scarring and other changes, it can help keep your skin healthy.

A tattoo artist may use a little bit of Vaseline, or they can use more of it all over the tattoo site. Using a small amount can help prepare your skin for getting a tattoo, so you don’t need a ton of Vaseline for it to help.

After the artist finishes your tattoo, they can wipe away the product. Then, you can apply a new layer of it as part of your aftercare.

What can I use to draw a tattoo stencil?

Summary – Tattoo stencils are used to transfer the design from the regular paper to the body. They are temporary until the moment the tattooer begins to ink the design. When you create tattoo stencils with tracing paper, you do not need any specific equipment like a thermographic transfer maker that is used with a tattoo transfer paper.

To create a tattoo stencil you will need tracing or wax paper, stencil fluid, an ink pen with a fine tip, masking tape, antibacterial soap, a razor, and stick deodorant. It will take the most time to create a design and to transfer it to the tracing paper.

If you do not want to draw the design by hand, you can use tattoo stencil apps.

Why do tattoo artists draw on tracing paper?

How To Draw On Tattoo Transfer Paper Credit: Sarah Harvey Whether it’s a picture from the wall of the studio or a custom design brought in by a client, successful tattoo artists transfer designs from drawing to skin. But so many often wonder how exactly they do it. Truth is, tracing is a time-honored artistic technique. Heck, the Renaissance masters would trace and transfer designs to a canvas before painting those priceless portraits and frescos in museums throughout the world.

The best tattoo artists utilize this same process as a guide to accurately create intricate artwork on the skin. Dip pens and tracing paper are valuable tools used to create what is called a “tattoo stencil,” and helps ensure a client will get exactly what they want from their ink.

After a traced design is applied, the artist can use their skills to follow the lines and fill in the blanks for the perfect tattoo. Here is how this whole thing works.

Do tattoo artists draw tattoo first?

17. Rome wasn’t built in a day (and your backpiece won’t be either) – OK, we’re back to reality TV again. Contrary to what you see on television a sleeve or backpiece isn’t completed in an hour, or two or even 6. Large pieces like the back, a sleeve or even half-sleeves require more work than you realize.

  1. Your first step will be a consultation where you’ll discuss your idea with your artist; they’ll trace the area you want tattooed and create a drawing for you;
  2. You’ll likely come back at a later date for your first appointment (and to see your drawing – this takes time);

Your custom piece, well that’s going to require multiple sessions with a 2-3 week break in between to heal.

Can you use Sharpie for tattoo stencil?

We’re here to shed some light on “freehand tattooing. ” In today’s age, tattoos have taken more of an artistic route. Gone are most of the dark and seedy street street shops. We’re seeing true artists master the craft of tattoo. Custom tattooing and freehand work has become the true definition of a “good shop.

” So what exactly is freehand tattooing and how does it happen? We are here to show you the process of drawing on the body and designing custom tattoos. From Sharpies to Skin freehand tattoo creation is an extraordinary art form.

A freehand tattoo is drawn on the client and then tattooed. We sketch directly on the skin with markers instead of transferring a stencil. This technique can help with the natural flow and shape of the body. This is the best way to take on curvy or angled areas.

  • Also, when a client wants to add to an existing tattoo, the new tattoo can be easily tailored to the empty space;
  • There are many great reasons to draw directly on skin;
  • let’s start with these;
  • You get an absolute original tattoo design;

Something that no one else can have because it’s drawn directly for you. It helps artists express their ideas and it flows directly on the body shape. You can use the muscles and curves to enhance the design. You can see directly what the artist is creating.

  • Together you can make decisions and additions to your piece;
  • It’s also easier to modify and erase ideas as the design progresses;
  • Not all tattoos can be drawn on paper;
  • Trusting your artist with a custom tattoo is a wonderful freedom;

Designing it in markers can provide a risk-free approach to concepts before getting the permanent tattoo. Here is the process in creating an original design on skin. First we cleanse the area to eliminate any natural body oils. Starting off with clean skin is always important and it allows the markers to flow gracefully.

Next we begin the drawing with the lightest color and sketch the basic form. As the details progress we will use a variety of colored markers working from light to dark and gradually build the detail in the design.

Then to end we refine it with darker tones to ready it for the tattooing. Usually, this can take anywhere from 30 minutes to an hour. Sharpies, although permanent, are easily erased with tattoo soaps or alcohol. Once the official design is created, the client and artist can inspect the areas thoroughly and make any final decisions before starting the tattoo.

Once everyone is excited about the creation we’re ready to go. The tattooing will lightly go over the on-skin drawing. As we tattoo the sharpie will gently wipe away leaving the client with a beautiful original new tattoo.

Going from Sharpie to skin offers a tattoo creation that is original and unique. It can compliment your body’s shape and create an amazing flow with the design. We strive to create on-skin whenever it can enhance a tattoos possibilities. Tattooing has become an incredible art form.

Can you use tattoo transfer paper without a printer?

Conclusion – Tattoo stencils are used by many tattoo artists, especially those that are just beginning their careers. The stencil helps to take the pressure off when drawing freehand onto the skin where there are many curves and contours. A tattoo stencil can be copied from sketch paper to tattoo transfer using a thermal copier or even a regular printer.

However, if you don’t have a printer available, you can do this by hand. The quality of the design may not be replicated quite as well when done drawing freehand, but you will still get a copy of the perfect tattoo by copying it over with the use of a thermal copier.

We hope that you have found the answer to your question in our guide, and you now understand the process of using tattoo transfer paper to get your tattoo design transferred onto the skin..

Can you use tattoo transfer paper in any printer?

So, Can I Use a Regular Printer To Create Tattoo Stencils? – If you want to work on your tattooing skills at home, but you don’t want to buy a pricey tattoo stencil printer, there is a cheaper solution. By using the right paper, and your home or office printer, you can create proper tattoo stencils at home.

So, yes, you can use the regular printer to create tattoo stencils. But, you cannot use the regular paper. What you’ll need instead is thermal paper, carbon transfer paper, or even temporary tattoo paper.

All of the papers can be used with an inkjet or laser printer, so don’t worry. Here are the main steps to follow when using the regular printer to create tattoo stencils;

  • Step 1 – make sure that the printer is connected to the computer you’ll be using for design creation and printing. If your design is completed, simply open the image.
  • Step 2 – Place the tattoo paper into the printer tray (where you’d put the regular paper). Make sure that the paper is position properly, especially if you’re using carbon tattoo paper. The white side of the paper should face the printer head. This is how it will receive the ink and actually print out a design.
  • Step 3 – when the printing is done, remove the paper from the printer tray and allow it to dry down completely. This especially applies if you’re using temporary tattoo paper. If you skin this step, chances are that the printed ink might smudge.
  • Step 4 – cut out the printed design. Make sure to stay close to the edges of the design, but do not cut into the design. This will make the stencil easier to work with later in the process.
  • Step 5 – and here we are, the moment we’ve been waiting for – transferring the design onto the skin. To do this, you can use a stick deodorant. Make sure to apply a thin layer onto the skin, and then place the stencil onto the deodorant. Make sure that the design side is placed down, so it can transfer properly. Press the paper firmly and let it sit for a minute.

Note : Bear in mind that there is always a possibility that your particular printer might not be effective using a thermal or hectograph transfer paper. There are cases where these kinds of papers only much up the printer and completely mess up the design, or don’t even print anything. After all, these papers are designed to only be used by professional thermal printers.