GetTattoosIdeas.com – Get Amazing Tattoo Ideas

GIRLS

How To Use Tattoo Paper?

How To Use Tattoo Paper
Thermographic tattoo transfer paper – Where manual transfer papers use three layers of paper, thermographic tattoo transfer paper has four. Firstly is a white layer on which you will draw your design. Second in line is a protective layer that is normally thrown away.

On the third layer is an ink that is typically purple. Lastly, there is a yellow layer that holds all the sheets together. To use thermographic tattoo paper, you must create your design on a normal sheet of paper and then slide this between the bottom yellow sheet and the ink layer.

You will then place all of the papers through a thermogenic transfer maker. You should always wash the area that you are planning to get inked before applying the carbon copy. Make sure that you press down on the paper and smooth it out before removing the paper.

Can you use regular paper for Tattoo transfer paper?

Download Article Download Article Tattoo transfer paper is what tattoo artists use to turn your pencil tattoo design into the guide for your actual tattoo. The most common way to use tattoo transfer paper is use a thermographic type of paper to transfer your tattoo design to your skin. But you can also use printable tattoo transfer paper in certain craft projects.

  1. 1 Create your tattoo design in pencil. Draw the tattoo design you’d like on a regular sheet of printer paper, in pencil. It should look exactly how you want your tattoo to look, because it will transfer exactly that way to the transfer paper. [1]
  2. 2 Slide your original design under the carbon paper. Thermographic transfer paper actually comes in a set of three sheets – an under sheet, a black piece of carbon paper, and a top transfer sheet where the carbon copy will appear. Place the piece of paper with your original design under the carbon paper and on top of the under sheet. [2] Advertisement
  3. 3 Put the whole set of papers through a thermographic transfer maker. This is specialty equipment that you can find in some tattoo shops. Some printing shops might also have the transfer maker you need. Exactly how you feed the papers in will depend on the exact model maker you have, but the design should always go in face down. [3]
  4. 4 Remove the top carbon copy from the rest of the transfer paper. Once you’ve run the transfer paper through the transfer maker, you’ll have an exact replica of your initial design on the top piece of carbon paper. Tear the carbon copy off of the set of transfer paper. [4]
  5. 5 Situate the carbon copy where your client wants the tattoo. It might take a couple of tries to get your design exactly where the customer wants it. Ask them repeatedly to make sure they’re happy with the eventual position. [5] EXPERT TIP Michelle Myles is the Co-owner of Daredevil Tattoo, a tattoo shop located based in New York City’s Lower East Side. Michelle Myles Tattoo Artist & Co-owner, Daredevil Tattoo Consider whether a stencil is needed for your tattoo design. Creating a stencil allows the client to see the design on paper beforehand, and it allows you to move the tattoo around if you need to. However, if you’re incorporating a new tattoo with existing tattoos, sometimes it’s easier to work freehand.
  6. 6 Wet down your customer’s skin with soapy water. Mix up a solution of soapy water – it should be soapy enough that you get bubbles. You can use a regular, mild dish soap. Dip a cloth in the soapy water and then rub it on the skin where the tattoo will go. [6]
  7. 7 Press the carbon copy down onto your client’s skin. Once your client’s skin is wet with soapy water, realign the carbon copy of the tattoo over the skin. Ask for your client’s approval of the placement, and then press the carbon copy down. Use your hands to completely smooth it out. As you do that, press down, to make sure that the design transfers. [7]
  8. 8 Lift off the carbon copy. As you lift the carbon copy away from your client’s skin, you should see the transferred design. If you notice there are places where the design didn’t come through, lay the carbon copy back down gently and press a bit harder. [8]
  9. 9 Repeat these steps if your client isn’t happy with the placement. Ask you client to approve the final placement once the design has transferred. If they aren’t happy, remove the design by wiping down your client’s skin with rubbing alcohol on a cotton ball. Repeat the process to create a new carbon copy of the design and apply it to your client’s skin.

    10. Advertisement

  1. 1 Prepare the surface of your craft. You can use transfer an image to pretty much any sturdy surface: wood, plastic, even canvas. Make sure the surface is clean and that any paint you want to use is dried. [9]
  2. 2 Print your chosen images on printable tattoo paper. You’ll need to download your image (or images) of choice to your computer, and then print them on printable tattoo paper. This paper is usually available at most craft stores, or from online retailers like Amazon. [10]
    • Make sure the image you want to print on the paper will fit onto your craft. You might have to size it down a bit to make it fit.
  3. 3 Apply the included adhesive to your image. The pack of printable tattoo paper will come with an adhesive sheet. Peel the protective layer off the adhesive – it’s usually a bright color like green – and smooth it over the image you’re using. Then trim around the edges of your image, cutting the adhesive sheet down as closely to the outline of the image as possible.
  4. 4 Peel the clear plastic film off the image. With the adhesive sheet on the image, it will now have the layer of adhesive and then a layer of clear plastic film over. Peel this clear film back to expose the sticky layer of adhesive on top of the image.
  5. 5 Place the image picture-side down on your craft. Before you stick it to your object, make sure you have it lined up the way you want it. You can’t unstick the image if it’s a little off-center, so be careful when you’re applying it. [11]
  6. 6 Moisten the back of the image with a wet towel. You can use a cotton towel or paper towel for this step, but a cotton towel works best. Press the damp towel down on the back of the image gently, until the whole thing is moistened. [12]
  7. 7 Peel the backing paper off gently. Start at a corner of the image, and gently pull the backing paper back. As the paper comes back, the image should stay on the surface of your craft. If you notice that the image is also pulling away, put the backing paper back down and remoisten that area. [13]
  8. 8 Seal the image with a glaze spray. This type of spray is available at most craft stores. It will seal the image and prevent any of the ink from flaking off in the future. Let the glaze fully dry before you move your craft – about 30 minutes. [14]
  9. 9 Finished.

    10. Advertisement

Ask a Question 200 characters left Include your email address to get a message when this question is answered. Submit Advertisement.

How to draw a tattoo on a regular paper?

how to use transfer paper for tattoos

Step One: – You should create your tattoo design in pencil on a regular sheet of white paper before sliding the design between the ink layer and the bottom yellow sheet. Drawing your design on a regular sheet of white paper allows you multiple tries to get the design right before transferring it over to the tattoo paper.

How do you print a tattoo on carbon paper?

Step-wise Method to Use a Thermographic Transfer Paper  – Thermographic Transfer Paper

  1. First, recreate the tattoo design on a regular printer paper using a pencil.
  2. Slide this sheet under the carbon layer and pass the set of papers through a thermographic transfer maker with the design facing down.
  3. You will now have an exact copy of your original design on the top layer. You can then remove the carbon sheet from the rest of the thermal transfer paper and discard it.
  4. Finalize where the tattoo needs to be made and apply a thin layer of soapy solution on this area using a damp cloth. This step will hold the transfer paper in place.
  5. Place the carbon copy firmly on the skin and smoothen it out by pressing it hard downwards but without shifting it.
  6. Peel off the carbon layer slowly, and you will notice that the design has been transferred on the skin.
  7. If you have placed the paper correctly at the first go, then you will notice the drawing once you peel away the transfer paper.
  8. The image will appear in bluish-purple, which will wash off gradually.
  9. Once the position and lining of the design have been fixed, you can start the ink work.

Rest assured, you can be sure of what your tattoo will look like once the job is over and let tattoo regrets at bay. Moreover, the method is safe to use and produces excellent results. References Images via Adobe Spark Inspired by the book: Kiplinger’s Personal Finance.

What is tattoo paper used for?

A tattoo transfer paper is a carbon paper for tattoos. It leaves a tattoo design outline on the skin. It can be used for applying fake or temporary tattoos on the skin. Also, tattoo artists use it to outline a permanent tattoo. When drawing complex tattoo designs, a tattoo paper helps you to line out the precise angles and details.