GetTattoosIdeas.com – Get Amazing Tattoo Ideas

GIRLS

How Do You Make A Temporary Tattoo?

How Do You Make A Temporary Tattoo

Download Article Download Article If you want to experiment with body art without permanently altering your skin, a temporary tattoo is the way to go. You can make your own temporary tattoo with just a few household supplies and items from the craft store. Learn three techniques for making temporary tattoos: using an eyeliner pencil, using a stencil, and printing one on paper.

  1. 1 Design the tattoo. To make a great tattoo, put some thought into its design before you apply it to your skin. Use a regular pencil and paper to sketch out some ideas, keeping the following pointers in mind:
    • Your eyeliner tattoo will look best with bold, simple strokes. Finer lines and more complicated designs could be more likely to smudge and become unrecognizable. Stick with clear shapes.
    • Decide how large you want it to be. A bigger tattoo may be more likely to appear to be hand drawn, whereas a smaller tattoo may look more “authentic. ” Design your tattoo according to the effect you want to achieve.
  2. 2 Pick out eyeliner. Go to the drugstore and buy a simple eyeliner pencil, the type that needs to be sharpened. Pick one that isn’t meant to be shiny or oily; a pencil that makes smooth, dry marks will make a longer-lasting smudge-free tattoo.
    • Jet black eyeliner makes for a striking temporary tattoo, but there’s no reason not to choose more than one color. Try emerald, purple, and sapphire to create your design or add a small accent.
    • Avoid liquid eyeliner. It’s more difficult to keep this type of eyeliner in place on parts of your body other than your eyelids. [1]
    • Practice drawing your design with your chosen eyeliner pencils on paper. Get used to the pressure you need to exert to create smooth strokes.

    Advertisement

  3. 3 Draw the design on your skin with the eyeliner pencil. Take your time and make sure the design is applied exactly how you want it to look. If you don’t like it, you can wash it off and start over.
    • You can draw your tattoo on any part of your body, but areas without a lot of hair might be easier to work with. Make sure the skin is clean and dry when you draw your design.
    • Use a cotton swab to blend colors and create shading.
  4. 4 Spray the design with hairspray. [2] The same chemicals that help hold your hair in place act as a sealant for the tattoo to keep it from coming off for a few hours. There’s no need to completely soak it; just give the area a light application. You can also use a clear nail polish/topcoat instead of hairspray.
  5. 5 Wash it off. This tattoo will last about a day before it begins to smudge. It washes off easily with warm, soapy water. You may want to remove it before going to bed to avoid getting eyeliner on your sheets. If you’re using clear nail polish instead of hairspray, you can peel it off or remove it with nail polish remover.

    6. Advertisement

  1. 1 Make a stencil. You can create professional-looking temporary tattoos by making a stencil, which helps you control the tattoo design rather than relying on your drawing skills to do the job. Decide what shape you want your tattoo to be, draw it on an index card, and cut out the shape using a cutting knife or a pair of small scissors.
    • Simple, bold shapes are the easiest ones to create with this method. Try diamonds, circles, and other geometric shapes.
    • For a more detailed tattoo, you can create a stencil based on an existing image. Check out How to Make a Graffiti Stencil for more information on this method.
  2. 2 Buy permanent markers. Choose one or more marker colors to use with your stencil. Black is a classic option, and may be the most likely to help your tattoo pass as a real one. Using another color can be just as fun.
    • Permanent markers contain chemicals that aren’t meant to be used on skin. Look for markers that are labeled as safe for this type of use. [3]
    • If you’d rather not use permanent markers, washable markers are also fine. The tattoo just won’t last quite as long.
    • Another good ink choice is stamping ink, which comes on wet stamping pads. To use this type of ink for your tattoo, press a cotton ball onto the ink pad and use it to wipe the ink over the stencil and onto your skin.
  3. 3 Apply the tattoo. Place the stencil against the part of your body where you want the tattoo to be. Use one hand to hold it firmly against the skin, so that the cut out shapes are lying flat. Use the other hand to color in the shapes with the markers you chose. When you’re finished, lift the stencil away and allow the marker ink to dry.
    • Make sure you apply the tattoo to clean, dry skin. Shave the hair in the area for a more even application.
    • If you have trouble holding the stencil in place, try using tape to affix it to the area. You could also try applying the tattoo to a part of your body with a flatter surface.
  4. 4 Remove the tattoo. When you’re finished sporting your temporary tattoo, it can be washed off with warm, soapy water, or you dab a cotton pad in oil and ‘scrub’ your tattoo off.

    5. Advertisement

  1. 1 Buy water slide paper. Have you ever bought a temporary tattoo from a quarter machine or the toy store? These temporary tattoos are printed onto water slide paper, a special paper lined with adhesive on one side. The tattoo design is printed with ink on the adhesive.
    • Water slide paper is available online or in craft stores.
  2. 2 Design the tattoo. The sky is the limit when you’re using water slide paper; any shape, color or pattern will print beautifully onto the paper and show up clearly on your skin. [4] Use Photoshop or a similar computer program meant for creating images to come up with a tattoo design.
    • Decide whether you want the tattoo to be in black and white or color. If you have a color printer, your design can include as many colors as you want.
    • Choose colors that will show up well against your skin.
    • Keep in mind that when you apply the tattoo, the image will be reversed on your skin. That means that if your tattoo includes a word, it needs to be reversed in the design, or it will read backwards once you put it on.
  3. 3 Print the tattoo. Feed the water slide paper into the paper handler in your printer. Make sure the paper is placed correctly so that the image will be printed onto the adhesive, not the matte paper. Cut out the tattoo with a pair of scissors when you’re finished.
  4. 4 Apply the tattoo. Place the tattoo ink-side down on your skin. [5] Cover it with a damp cloth or paper towel. Press down on the cloth or paper towel and hold it in place for 30 seconds, or until it becomes translucent. Remove the cloth or paper towel and peel back the paper.
  5. 5 Remove the tattoo. This type of tattoo may last a week or more before it starts to peel off. If you want to remove it before it comes off on its own, scrub it off with soapy water and a scrub brush.

    6. Advertisement

  1. 1 Buy any color Sharpie. Also get some baby powder and hairspray. [6]
  2. 2 Draw the tattoo onto your body. Use whatever design you like and place it wherever you want, somewhere easily reachable.
  3. 3 Rub the tattoo with baby powder.
  4. 4 Apply the hairspray lightly onto the tattoo. Don’t use too much, or your skin will feel extremely dry. If you spray too much by accident, get a cotton swab and dab the area around the tattoo with water.
  5. 5 Enjoy your new tattoo. The tattoo should last around a month.

    6. Advertisement

Add New Question

  • Question Can you make your own temporary tattoos? This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness. wikiHow Staff Editor Staff Answer Yes, you certainly can make your own temporary tattoos. You can make them from pen or marker ink, from eyeliner or other types of makeup, from paper and stamps, from paint, from henna, from glitter, etc. And you can use stencils or shapes to help define the design you’d like. For instructions on using a few of these items to make temporary tattoos, follow the methods in the article above.
  • Question How long do temporary tattoos last? This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness. wikiHow Staff Editor Staff Answer The length of time a temporary tattoo will last depends on what you’ve used to make the tattoo. Some marker tattoos can last up to a week, while some paper tattoos will wash off in the next shower. Henna tattoos can last up to 3 weeks. A rough estimate would be about anywhere between 2 days to 3 weeks, depending on what it was made from and how careful you’ve been not to wash or scrub it off.
  • Question Can you print your own temporary tattoos? This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness. wikiHow Staff Editor Staff Answer Yes, you can print temporary tattoos with a design of your own choice by using water slide paper. The instructions for doing this are found here: How to Make a Temporary Paper Tattoo.
  • Question Is there a temporary tattoo that lasts for months? This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness. wikiHow Staff Editor Staff Answer There are “semi-permanent” inks that can be used to make a tattoo that lasts about a month, and it is possible to have this reapplied monthly for up to 6 months (it’s not recommended any more than that). It is more like a fruit stain than an ink and its longevity and suitability will vary from person to person. There are also inks that fade over time. Given the interest in temporary tattoos using inks, this area continues to grow and change, so it’s recommended you talk to your local tattoo artist to see what new options exist.
  • Question Do I need to reapply the hairspray if I have a shower? Rockstar Heaven Community Answer Yes. The warm water will get rid of the layer of hairspray. So if you want it to last, reapply hairspray after showering.
  • Question I don’t have baby powder. Could I just use hairspray? Yes. Hairspray is the only thing needed to make the tattoo last longer. Baby powder just makes it shiny.
  • Question Will my tattoos withstand a bath or shower? It might if it is printed or if it is drawn with a permanent marker. If it is drawn with a whiteboard marker or an ink pen, then no, it won’t last. Rubbed-on tattoos tend to come off easily under warm water and rubbing too.
  • Question Will the Sharpie method damage my skin in any way? It won’t damage your skin in the long run, but you may make your skin red from rubbing while trying to get it off later.
  • Question Do you just put on the baby powder and leave it there, or shake it off? Sprinkle the baby powder onto wherever you have drawn the tattoo, and dust off the excess. Then spray the lightly powdered skin with hairspray.
  • Question Do I have to use the hairspray every day? Or just once? You should only have to use it once, but if it begins to fade, you can add another coat.

Show more answers Ask a Question 200 characters left Include your email address to get a message when this question is answered. Submit Advertisement.

How can I make my own temporary tattoos?

About This Article – Article Summary X To make your own temporary tattoo, first draw or print out the design you want to use. Then, place tracing paper over the design and trace it with a pencil. Trace over the design again with a non-toxic, black felt-tip marker to make it dark, then cut off the excess paper around the design with scissors.

  • Clean the area of your skin where the tattoo will go with rubbing alcohol and let it dry;
  • Cleaning your skin first will help the tattoo stick better;
  • Place the tracing paper face down on your skin and wet it with warm water using a washcloth;

Let it sit for 30 seconds, then carefully peel off the tracing paper to reveal a faint outline of your design. Now, go over the design on your skin with the felt-tip black marker to make it pop. Sprinkle baby powder over the design, dust it off, and spray liquid bandage on your tattoo.

Can you make a temporary tattoo with regular paper?

Steps Download Article –

  1. 1 Purchase water slide paper. Most tattoo stickers are made with water slide paper, which makes the tattoo stick onto the skin and last. You can purchase water slide paper from a craft store or online.
    • If you don’t have access to water slide paper, normal printing paper will work as well.
  2. 2 Choose a picture online or create your own. You can find a cool tattoo by looking up “tattoo designs” online or create your own using Photoshop.
    • Choose a tattoo that is meaningful to you. You can print out special symbols, a character, or a drawing of an animal.

    Advertisement

  3. 3 Print out your picture. Remember to flip the tattoo before you print it, especially if it contains words, as the tattoo will appear mirrored once you apply it.
    • You can print in colour; however, black works best.
    • Print the picture as big as you want it. If you’re creating batches of tattoos, a smaller size is best.
  4. 4 Cut out your picture. Leave a 1/2 inch rim around the edges. The picture shouldn’t be cut too small.
  5. 5 Soak your picture in perfume. Spray the front and back of the paper with a scented perfume of your choice. Apply a generous amount.
  6. 6 Soak the picture in hot water for three minutes. Fill up a sink or small bowl with hot water and place your picture gently on top. Gently push the picture to break the water’s surface and let it sink.
  7. 7 Allow the paper to soak for three minutes. It’s helpful to set a timer to remind you to remove the paper. Once the paper has finished soaking, remove it from the water and spray it with perfume again.
  8. 8 Apply the tattoo to your skin. Pick an area where you’d like the tattoo to go, such as your wrist or arm. Spray the side of the paper that you’re sticking onto your skin with perfume.
    • Place the ink side of the paper face down on your skin and spray it with perfume once applied.
  9. 9 Allow the tattoo to adhere to the skin for seven minutes. Once the timer is up, carefully remove the tattoo. Starting from the edges, slowly peel the paper away from your skin.
    • If you have paper residue on the tattoo, wash it off with water, don’t try to rub it off, it will ruin the tattoo.
  10. 10 Gently pat the tattoo dry with a towel. Now you have a brand new waterproof temporary tattoo that should last for up to a month!
    • If you for some reason want or need to remove the tattoo, rubbing alcohol on the skin will wash it off.

    11. Advertisement

Ask a Question 200 characters left Include your email address to get a message when this question is answered. Submit Advertisement

  • Use very hot water when soaking your tattoo
  • It may take a few tries to get the perfect tattoo
  • If you would like to take off your tattoo, put hand-sanitizer on it and rub it off.

Thanks for submitting a tip for review! Advertisement

  • Make sure you are not in an enclosed room when spraying the perfume, it can be toxic to breathe in too much.

Advertisement.

How do you make a temporary tattoo pen at home?

If you wish to get a tattoo done, but don’t want a permanent one, why not design a DIY temporary tattoo? To start, zero in on a design you want. Avoid a complicated pattern. Use a gel pen in a dark colour to draw the design. The ink in gel pens is easy to transfer from the paper to the skin.

Draw the design on paper such as tracing paper or parchment paper using a pencil, then fill it with colour using the gel pen. Wet a piece of cloth with warm water once you have decided on the spot where you want the tattoo.

Place the design on the skin. Press the wet cloth firmly on the paper for approximately 30 seconds. Slowly and gently peel a corner of the paper to see if it is completely transferred to your skin. Once it is done, remove the cloth and peel off the paper. Let the design air dry, and be careful not to brush it against your clothes or your body.

How do you make a fake tattoo with hairspray?

How do I transfer a drawing onto my skin?

Step 5 – Lay your drawing over top of the moist area, and apply pressure to the drawing. Continue to press the drawing onto the skin until all the lines have become transferred.

What can be used as tattoo ink?

Download Article Download Article There are several ways that you can make tattoo ink. Using wood ashes and white liquor to make an organic tattoo ink is a cheap but sterile option. You can also use dry ink pigment with medical grade liquids to make a tattoo ink that mimics what tattoo artists use in their shops. Safety is important when you’re mixing tattoo ink, so make sure you wear gloves and a mask over your mouth and nose.

  1. 1 Burn wood to create ashes. In order for wood ashes to work well as a tattoo ink, you need to completely burn the wood you’re using. The ashes should be totally black, with none of the wood’s natural color still visible. They should also be completely cooled when you use them. [1]
    • Different types of wood will give you a slightly different shades of color when the ashes are used as ink. Lighter woods will produce a grayer pigment; darker woods will produce a blacker pigment.
  2. 2 Grind the ashes. Once you’ve burned the wood of your choice to create ashes, you’ll need to grind the burned wood. You want the ash particles as fine as possible so that they make a smooth and easily usable ink. Advertisement
  3. 3 Choose a clear spirit. To create tattoo ink from wood ashes, you’ll need to mix the ashes with a liquid. Some people recommend that you use distilled water, but this still risks some bacteria getting under your skin as you press the needle in. Instead, use a clear spirit – like vodka or gin – as your liquid base. [2]
  4. 4 Mix them together. Mix your ashes and clear spirit together by blending them in a blender for 10 to 20 minutes. The consistency should be a slurry – a little thicker than water, but thinner than a paste – and should not have any chunks in it. [3]
    • It’s hard to recommend an exact proportion of ashes to liquid for this, since it will depend on how finely you grind up the ashes, the type of wood you use, and the desired pigmentation of your ink. It’s better to add liquid slowly – you can always add more, but you can’t take any out.
  5. 5 Track the ash and liquid amounts. If you’re creating a larger tattoo, make sure you track the ash and liquid amounts you’re using. You’ll likely have to mix up more than one batch of ink, and knowing the exact measurements keeps the pigment of the ink consistent. [4]

    6. Advertisement

  1. 1 Choose your pigment powder. Many tattoo supply companies have pigment powder available for purchase. You’ll need to decide which color or colors you want to use and purchase those colors.
    • It’s best to purchase pigment powder from a tattoo supply company since you can be sure it’s safe. You don’t want to accidentally use pigment ink used in car paint.
  2. 2 Mix witch hazel with propylene glycol and medical grade glycerin. When using pigment powder, you’ll need to add it to medical grade liquids. Mix together 2 pints (32 ounces) of witch hazel (which you can get from most holistic health stores or online), 2 ¼ teaspoons (0. 38 ounces) of medical grade glycerin and 2 ¼ teaspoons propylene glycol to form a liquid base.
  3. 3 Add the pigment powder. Once your liquid base is mixed, add your pigment powder. The amount of pigment powder you use will depend on how bright or subdued you want the color to be. Add the pigment powder slowly – again, you can always add more but you can’t take any out.
  4. 4 Mix in a blender. To mix your ink together, put it in a blender at low speed. If you find your ink is too thick, add a bit more liquid. If it’s too thin, add more pigment. Once your ink reaches your desired consistency, turn the speed up to medium and mix your ink for about an hour.
  5. 5 Store in a sterile container. Once your ink is finished, store it in a sterile, airtight container. You should place the container in a cool, dark place.

    6. Advertisement

  1. 1 Gather your supplies. To apply your homemade ink at home, you’ll need a few supplies: a few very fine sewing needles, a #2 pencil, a ballpoint pen, some sewing thread, matches, and alcohol swabs. You’ll also need your ink!
  2. 2 Wash your hands. Before you begin to give yourself a tattoo with your homemade ink, make sure you thoroughly wash your hands. This means washing your hands well, with soap, for at least two minutes.
    • For some extra cleansing, you can also wipe your hands with an alcohol wipe after you’ve washed them.
  3. 3 Make your needle. You’ll want to prepare your needle for applying your homemade ink by attaching it to a longer handle. This gives you more control over the movement of the needle and makes tattooing easier. Insert the eye end of your thin needle into the eraser of the #2 pencil.
    • You might want to wrap the thread with some tape to give it extra support and make sure it doesn’t move.
  4. 4 Heat your needle. Once you’ve got your needle put together, you’ll need to heat the tip up. Light a match and hold the needle over it for ten to fifteen seconds. Make sure you turn the needle so it heats evenly. Heating the tip of the needle kills any germs on the needle. This can prevent infection when the needle goes under your skin to apply the ink.
  5. 5 Draw your design. Use an alcohol swab to clean the area of your skin where you want to apply your tattoo. Then, using the ballpoint pen, draw on your design.
    • If you’ve never done your own tattoo before, you might want to start with a small design.
    • You should practice your design on paper before you draw on your skin.
  6. 6 Ink your needle. Once you’re satisfied with your design placement and style, it’s time to ink your needle. Simply dip your needle into your homemade ink. Gently tap the needle on the side of the jar or its lid to remove any excess ink. You don’t want the needle to be dripping with ink.
  7. 7 Apply the ink to your skin. Once you’ve got ink on your needle, poke the needle into your skin at any point in your design. To make sure the ink actually stays in your skin, you’ll need to poke through the first two layers of skin. Continue this process along the lines of your design.
    • Your skin may bleed occasionally when you poke the needle through. Some bleeding is normal, but if you notice a lot of blood, stop immediately.
    • You’ll need to reload your needle with ink occasionally. If you notice that the ink color is fading, reload the needle.
  8. 8 Take care of your tattoo. After you’ve finished your tattoo, you should wipe it down gently with water and mild soap and apply anti-bacterial ointment. If your tattoo is in a place that is likely to rub against your clothing, wrap it with clear plastic wrap. Once you unwrap it, clean it with soap and water, but don’t use a cloth. [5]
    • In the days after your tattoo is finished, you might notice your skin dries out quite a bit. This is normal. Just use a bit of fragrance-free moisturizer and rub it gently over your tattoo.
  9. 9 Touch up the design of your tattoo. Your skin will swell when you repeatedly poke it with a needle. Once you’ve finished your tattoo and your skin has had time to heal, you might notice that you’ve missed a few spots. Simply go back and repeat the tattooing process to touch up the areas that you missed.

    10. Advertisement

Add New Question

  • Question Will this ink be able to last up to a year? The maximum that this tattoo ink will probably last up to is maybe 8 months. But it all depends on how you make it, and how you use it, and where you put it. If you put it on your back, which will probably be covered up by your shirt, it will more likely last longer than if you have it all on your arm.
  • Question If I don’t have a blender, what do I do? This may make it a bit harder, but you can try to beat it with a spoon. It will take longer, and it may not make the ink mix last as long. Otherwise, it is okay to use a spoon!
  • Question Can I make tattoo ink from store-bought charcoal? Killian Campbell Community Answer You can, but it won’t last long. If you buy a good and more expensive brand with lots of phosphates, it will last longer than the cheaper brands.
  • Question Is it actually permanent or will it go away within a year? It’s actually semi-permanent and will fade away in a year, more or less. If you want it to last less time, you can try henna tattoos.

Ask a Question 200 characters left Include your email address to get a message when this question is answered. Submit Advertisement

  • In the days after your tattoo is complete, you might notice that scabs form, and that your tattoo might bleed a bit. This is normal. Don’t peel the scabs off – they’ll come off naturally in subsequent cleanings.
  • Your tattoo will remain swollen and sore for a few days. It might also feel warm to the touch. This is normal.

Thanks for submitting a tip for review! Advertisement

  • Make sure you’re using ink pigment created specifically for tattoos. Some websites will sell ink pigment without noting that they’re actually for things like car paint. Buying your pigment from tattoo websites is the safest route.
  • If your tattoo stays red and swollen and sore more than 2 days or so, seek medical attention. You might be having an adverse reaction to the tattoo.
  • Use gloves and a mask when you’re mixing tattoo ink.

Advertisement.

What can I use as transfer paper for tattoos?

How To Use a Regular Printer for Tattoo Transfer Paper – You can use a regular printer to create a tattoo; you just need to make sure that you are using the correct paper type for tattoo stencils. This paper would be thermal paper or hectograph carbon paper.

The tattoo transfer paper can be used with an inkjet or laser printer without any issues. The first thing you need to do is make sure that the computer is connected to your printer before printing your tattoo design.

You must then add your tattoo transfer paper to the printer, the same way you would with regular paper, making sure that it’s the right way up if using carbon paper. Print your design and allow it to dry completely before touching it so that it doesn’t smudge.

How do you make a tattoo with Colgate?

You can flex your artistic muscle and give yourself a tattoo with some simple items stashed away in your house. No, not ink and a pin for an ill-advised stick-and-poke. More like toothpaste and a pen for a sick tat. That’s right, commitment haters: This artistic ink is only temporary.

This viral YouTube tutorial, which has more than 38 million views, demonstrates how to use a pen and toothpaste (plus a few extras) to make a DIY temporary tattoo. While the hack is basically made for a boring quarantine-night-in, the DIY temporary ink is also perfect for testing out new tattoo designs before you call up your choice parlor for the real deal.

Plus, the result is waterproof and all. As the video outlines, the first step is to prep the to-be-inked area by shaving it clean of hair. Then, apply a thick layer of toothpaste to the skin and rub it in. This minty step is said to remove excess oil from the skin and reportedly helps the longevity of your temporary ink.

  1. The video recommends Colgate toothpaste, though it’s unclear if the particular brand has any effect on the final product;
  2. After wiping the excess toothpaste off, grab a marker-like pen and get to sketching your ink;

Once you are happy with the design, dust it with face powder or baby powder. This particular tutorial then goes over the design again in waterproof eyeliner for extra staying power, dusting it once more for good measure. To lock the resulting ink in even further, apply one super thin layer of Vaseline, which is known for repelling water.

After drying for 30 minutes, your tattoo is ready to be put through the wringer. That includes pools, showers, gym sessions, and whatever other trouble you could get into. Think temporary tattoos are only for little kids and Coachella baddies? Think again.

Watch the tat tutorial for yourself below: Katie Dupere is an editor and writer in New York City specializing in identity, internet culture, social good, lifestyle and beauty topics..

How do you make tattoo ink with Vaseline?

Download Article Download Article Whether you’re tattooing in prison or just on a budget, you can create “prison-style” tattoo ink using baby oil, charcoal, and a bit of water. Be aware that this is neither a safe nor a certain substitute for actual tattoo ink. Do-it-yourself tattooing is illegal in most prisons, and it can open you up to the risk of serious blood infections. People do, however, use the following recipe to make a basic ink.

  1. 1 Find a can or metal container. It should be able to hold 4-6 ounces of baby oil, along with a bit of balled-up cotton. Try using a clean, empty boot polish can. If you don’t have access to a pre-made container: use a sharp implement to shear a 12-ounce aluminum can in half, and use the bottom half as your container.
    • You may be able to buy a boot polish can from the prison commissary. [1] If you can’t find boot polish, look for another suitable can that you can buy. It’s important that you don’t arouse suspicion from the guards, so don’t buy a can of something that you would never normally use.
  2. 2 Put cotton inside the can. If you have access to cotton, ball it up inside the can as a “wick” to help ignite the baby oil. Make sure to leave at least a bit of the cotton dry and oil-free so that it will be easier to light. Use cotton balls, if you can, or tear a small strip of cotton from a shirt or pillowcase.
    • Try cutting the sleeves off your shirt. This way, you can use the cotton without arousing suspicion or completely ruining the shirt.

    Advertisement

  3. 3 Douse the cotton with baby oil. You should be able to buy this oil from the prison commissary. Use enough baby oil to completely saturate the cotton, and make sure not to spill. You will burn this oil to create a black, sooty powder: the base ingredient of your tattoo ink.
    • In the absence of baby oil, you may be able to use Vaseline or another petroleum-based substance. Do not melt poly fiber plastics, as these chemicals will irritate your skin. [2]
  4. 4 Build a “soot collector”. Find a flat, clean piece of metal that will fit over the opening of the can without covering it completely. If you can’t find anything else, try cutting a sheet from the top half of the aluminum can, then pressing it until it is flat. This piece will collect the sooty powder so that you can mix it into ink.

    5. Advertisement

  1. 1 Make fire. Use a lighter or matches, if possible. If you are in prison, however, you may not have access to a traditional fire-starter. Find a way to make fire without a lighter. You will need fire both to make the ink and to disinfect the needle.
    • Try “popping a socket”. Open up an electrical socket, then hold a pencil tip and a wire up to the charged interior. This will create a spark. Hold a piece of paper or tissue against the spark until it catches flame. [3]
    • Be very careful when handling flame. On one hand, you might badly burn yourself or start a fire that you can’t control. You also run the risk of attracting the attention of the guards.
  2. 2 Burn the baby oil and cotton. Use the cotton (or paper) as a wick: light a dry corner of the flammable material, and let it ignite the oil. Arrange the metal sheet or “soot collector” so that the smoke hits it. As the baby oil burns, the metal sheet will blacken with soot. Let the baby oil burn until it is spent, and let the metal cool before handling it directly.
    • Be prepared to burn the baby oil several times. The burning process does not produce a lot of powder, so you may need to burn the oil several times until you have enough to harvest.
  3. 3 Save the black powder. Use a paper or plastic card to scrape the black powder from the metal sheet. Do not use a razor or another metal scraper to remove the soot – the metal might leave shards in the powder, which will then wind up in your skin. Start by scraping the powder onto a clean, smooth surface or a white piece of paper.
    • Do not expose the powder to any moisture until you’re ready to mix your ink.
    • The metal sheet and canister will be hot from the flame. Do not handle the metal directly until you’ve given it time to cool. Avoid using a credit card to scrape soot from hot metal, as the edge of the card might melt into the powder.

    4. Advertisement

  1. 1 Put the tattoo powder into a small cap or container. Many prison tattooists use a clean toothpaste cap. Fill the cap about halfway with the sooty powder, and leave enough room in the container to mix in water. If you collected the soot on a sheet of paper, you can fold the paper and let the soot slide directly into the cap.
  2. 2 Add water. Mix the soot with a drop of clean water. Be very sparing with the liquid-to-soot ratio; a bit of water goes a long way. Start with a small dose, and mix the soot together with the water in the toothpaste cap. Consider adding a bit of clear, scentless baby oil to thicken the mixture.
    • Remember: the soot is much harder to come by than water or baby oil. It is a limited resource. Be very careful with your mixing so that you don’t need to make more soot.
  3. 3 Finish mixing the ink. Stir the soot-and-water mixture until it is about the consistency of a pen’s ink. If anything, the ink should be slightly thicker. Adjust the portions of each ingredient until the texture is just right. To thin your ink, add a dash of water or baby oil. To thicken it up, add more soot.

    4. Advertisement

Add New Question

  • Question Can I use normal pen ink? No, you cannot use normal pen ink as it can poison you if it gets into your blood stream.
  • Question Is there a way to make a tattoo needle? To make a tattoo needle, start with a pencil. Put a needle on the side of the pencil and wrap a thin string around it. (A lot of string. ) Make sure that the string goes near the tip of the needle, but not too close. The string is used to hold extra ink so that you don’t have to keep going back to the ink cup.
  • Question Do I need baby oil and shampoo, or could I just use soot and water? You don’t necessarily need the shampoo, but the baby oil is required to turn the soot into ink.
  • Question Can normal pen ink work? You’ll run the risk of an infection, or having a very bad-looking piece of art.
  • Question What kind of ink can I use for at home tattooing? You can use waterproof Black India ink from a local craft store. It comes in a small glass bottle with a dropper built into the lid. Thicken it up with ashes to desired consistency and start scratching.
  • Question Does the “soot collector” have to be metal? Not necessarily, but it has to be able to withstand fire, so it can’t be anything like plastic.
  • Question What kind of shampoo can I use? You don’t absolutely need shampoo, but the clearest and simplest you can find would be best.
  • Question Other inmates have been burning their ramen for like 9 minutes. Could this be to get ash for ink? When I was in prison I did this by burning the ramen and mixing the ink with baby oil. It didn’t work that well, though, so I wouldn’t recommend this method.
  • Question Can I thicken India ink with baby oil? Yes, you can.
  • Question Will it be permanent? No, it is not professionally done so it will fade pretty quickly, especially if it’s on a place you wash frequently like your hands.

Show more answers Ask a Question 200 characters left Include your email address to get a message when this question is answered. Submit Advertisement.

Can I do a tattoo with pen ink?

Final Thoughts – As you may have noticed, we seriously advise people not to do any DIY, homemade tattoo, especially the stick-and-poke kind with pen ink. This can be seriously dangerous and can put your health at risk. It is always better to go get professionally tattooed than to risk skin and tattoo infection. What we’re trying to say is that DIY tattoos aren’t simply worth it! Also Read:

  • 5 Best Stick-and-Poke Tattoo Kits (2022 Updated)
  • 6 Stick and Poke Ink Alternatives (And Why You Shouldn’t use Them)

How do u do a tattoo with perfume?

Is there a tattoo for 6 months?

Is there a temporary tattoo that lasts for months? – According to professionals, semi-permanent tattoos are impossible to achieve. Chinese ink is a method where a tattoo artist cuts the surface of the skin and applies their own blend of ink to create a semi-permanent tattoo that lasts up to 6 months.

This technique is controversial because the ink ingredients could be toxic and, in many cases, last much longer than expected. Henna tattoos are another semi-permanent method that can last up to 1 month, depending on exposure to water.

After some time, they fade from black to brown and then orange before disappearing. Since henna can cause allergic reactions, experts recommend patch testing.

How do you make semi permanent tattoos?

How do you make a pen and toothpaste tattoo?

You can flex your artistic muscle and give yourself a tattoo with some simple items stashed away in your house. No, not ink and a pin for an ill-advised stick-and-poke. More like toothpaste and a pen for a sick tat. That’s right, commitment haters: This artistic ink is only temporary.

This viral YouTube tutorial, which has more than 38 million views, demonstrates how to use a pen and toothpaste (plus a few extras) to make a DIY temporary tattoo. While the hack is basically made for a boring quarantine-night-in, the DIY temporary ink is also perfect for testing out new tattoo designs before you call up your choice parlor for the real deal.

Plus, the result is waterproof and all. As the video outlines, the first step is to prep the to-be-inked area by shaving it clean of hair. Then, apply a thick layer of toothpaste to the skin and rub it in. This minty step is said to remove excess oil from the skin and reportedly helps the longevity of your temporary ink.

  1. The video recommends Colgate toothpaste, though it’s unclear if the particular brand has any effect on the final product;
  2. After wiping the excess toothpaste off, grab a marker-like pen and get to sketching your ink;

Once you are happy with the design, dust it with face powder or baby powder. This particular tutorial then goes over the design again in waterproof eyeliner for extra staying power, dusting it once more for good measure. To lock the resulting ink in even further, apply one super thin layer of Vaseline, which is known for repelling water.

  • After drying for 30 minutes, your tattoo is ready to be put through the wringer;
  • That includes pools, showers, gym sessions, and whatever other trouble you could get into;
  • Think temporary tattoos are only for little kids and Coachella baddies? Think again;

Watch the tat tutorial for yourself below: Katie Dupere is an editor and writer in New York City specializing in identity, internet culture, social good, lifestyle and beauty topics..